Haier Aircon 23 Error Code
Use this Haier 23 error code guide to confirm the source table meaning, capture the reporting equipment and model, and match the service manual before diagnosis. Match the model first; same-looking codes can point to different rows.
What does Haier 23 mean?
Haier 23 is listed as discharge-temperature sensor Td failure, compressor driver-module overtemperature protection, and communication failure between the indoor and outdoor units in MRV-S MVHP outdoor unit, S2 R32 split-system outdoor unit, FlexFit Pro large cassette, MRV5 AV08-AV26IMVEVA - outdoor failure table, 2024 1U90-1U160 S2 outdoor units, and 2024 3U / 4U / 5U S2 multi-split outdoor units source rows. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the matching source row
The same visible code has more than one source-backed meaning. Match the model family, system type, or reporting unit before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| MRV-S MVHP outdoor unit | Discharge-temperature sensor Td failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| S2 R32 split-system outdoor unit / 2024 1U90-1U160 S2 outdoor units | Compressor driver-module overtemperature protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| FlexFit Pro large cassette | Communication failure between the indoor and outdoor units | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MRV5 AV08-AV26IMVEVA - outdoor failure table — Discharge temperature sensor Td1 failure | Discharge temperature sensor Td1 failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MRV5 AV08-AV26IMVEVA - outdoor failure table — Discharge temperature sensor Td2 failure | Discharge temperature sensor Td2 failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| 2024 3U / 4U / 5U S2 multi-split outdoor units | Power module overheated | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
- Code
- MRV-S MVHP outdoor unit
- What it means
- Discharge-temperature sensor Td failure
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- S2 R32 split-system outdoor unit / 2024 1U90-1U160 S2 outdoor units
- What it means
- Compressor driver-module overtemperature protection
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- FlexFit Pro large cassette
- What it means
- Communication failure between the indoor and outdoor units
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- MRV5 AV08-AV26IMVEVA - outdoor failure table — Discharge temperature sensor Td1 failure
- What it means
- Discharge temperature sensor Td1 failure
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- MRV5 AV08-AV26IMVEVA - outdoor failure table — Discharge temperature sensor Td2 failure
- What it means
- Discharge temperature sensor Td2 failure
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- 2024 3U / 4U / 5U S2 multi-split outdoor units
- What it means
- Power module overheated
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
How this fault may be shown
Match every scope item the source provides—exact model where listed, PCB or panel where listed, and reporting device—before using a displayed value. These manufacturer crosswalks are display evidence, not universal codes or repair instructions.
Multi-Split wired controller YR-E17 / YR-E17ASource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 16
| Reported by | Shown as | Source meaning |
|---|---|---|
| Wired controller YR-E17 or YR-E17A | 2B | Power module overheated |
- Reported by
- Wired controller YR-E17 or YR-E17A
- Shown as
- 2B
- Source meaning
- Power module overheated
Multi-Split wired controller YR-E16 familySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 16
| Reported by | Shown as | Source meaning |
|---|---|---|
| Wired controller YR-E16, YR-E16A, or YR-E16B | 43 | Power module overheated |
- Reported by
- Wired controller YR-E16, YR-E16A, or YR-E16B
- Shown as
- 43
- Source meaning
- Power module overheated
Multi-Split cassette air-conditioner displaySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 16
| Reported by | Shown as | Source meaning |
|---|---|---|
| Cassette air-conditioner display | 2B | Power module overheated |
- Reported by
- Cassette air-conditioner display
- Shown as
- 2B
- Source meaning
- Power module overheated
Multi-Split cassette TIMER LED5 / RUNNING LED1Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 16
| Reported by | Shown as | Source meaning |
|---|---|---|
| Cassette unit TIMER LED5 and RUNNING LED1 | LED5 4 / LED1 3 | Power module overheated |
- Reported by
- Cassette unit TIMER LED5 and RUNNING LED1
- Shown as
- LED5 4 / LED1 3
- Source meaning
- Power module overheated
Multi-Split ceiling-floor, cassette, or duct LED4 / LED3Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 16
| Reported by | Shown as | Source meaning |
|---|---|---|
| Ceiling-floor, cassette, or duct unit TIMER LED4 and RUNNING LED3 | LED4 4 / LED3 3 | Power module overheated |
- Reported by
- Ceiling-floor, cassette, or duct unit TIMER LED4 and RUNNING LED3
- Shown as
- LED4 4 / LED3 3
- Source meaning
- Power module overheated
Multi-Split wall-unit displaySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 16
| Reported by | Shown as | Source meaning |
|---|---|---|
| Wall-unit display | F5 | Power module overheated |
- Reported by
- Wall-unit display
- Shown as
- F5
- Source meaning
- Power module overheated
Multi-Split alternate table wired controller YR-E17 / YR-E17ASource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 18
| Reported by | Shown as | Source meaning |
|---|---|---|
| Wired controller YR-E17 or YR-E17A | 2B | Power module overheated |
- Reported by
- Wired controller YR-E17 or YR-E17A
- Shown as
- 2B
- Source meaning
- Power module overheated
Multi-Split alternate table wired controller YR-E16 familySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 18
| Reported by | Shown as | Source meaning |
|---|---|---|
| Wired controller YR-E16, YR-E16A, or YR-E16B | 43 | Power module overheated |
- Reported by
- Wired controller YR-E16, YR-E16A, or YR-E16B
- Shown as
- 43
- Source meaning
- Power module overheated
Multi-Split duct TIMER LED4 / RUNNING LED3Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 18
| Reported by | Shown as | Source meaning |
|---|---|---|
| Duct unit TIMER LED4 and RUNNING LED3 | LED4 4 / LED3 3 | Power module overheated |
- Reported by
- Duct unit TIMER LED4 and RUNNING LED3
- Shown as
- LED4 4 / LED3 3
- Source meaning
- Power module overheated
Multi-Split ceiling-floor or cassette TIMER LED6 / RUNNING LED1Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 18
| Reported by | Shown as | Source meaning |
|---|---|---|
| Ceiling-floor or cassette unit TIMER LED6 and RUNNING LED1 | LED6 4 / LED1 3 | Power module overheated |
- Reported by
- Ceiling-floor or cassette unit TIMER LED6 and RUNNING LED1
- Shown as
- LED6 4 / LED1 3
- Source meaning
- Power module overheated
Multi-Split panel display on PCB 0151800644PCB 0151800644 · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 18
| Reported by | Shown as | Source meaning |
|---|---|---|
| Duct, ceiling-floor, or cassette panel display | F23 | Power module overheated |
- Reported by
- Duct, ceiling-floor, or cassette panel display
- Shown as
- F23
- Source meaning
- Power module overheated
Split outdoor control board - 1U105 SSModels 1U105S2SS1FA, 1U105S2SS2FA · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 20
| Reported by | Shown as | Source meaning |
|---|---|---|
| Outdoor control-board diagnostic display | 23 | IPM temperature too high |
- Reported by
- Outdoor control-board diagnostic display
- Shown as
- 23
- Source meaning
- IPM temperature too high
Split outdoor control board - 1U125 SN / 1U140 SPModels 1U125S2SN1FA, 1U125S2SN1FB, 1U140S2SP1FA, 1U140S2SP1FB · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 20
| Reported by | Shown as | Source meaning |
|---|---|---|
| Outdoor control-board diagnostic display | 23 | IPM temperature too high |
- Reported by
- Outdoor control-board diagnostic display
- Shown as
- 23
- Source meaning
- IPM temperature too high
Low-static duct PCB 0151800267 LED4 / LED3PCB 0151800267 · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 21
| Reported by | Shown as | Source meaning |
|---|---|---|
| Low-static duct TIMER LED4 and RUNNING LED3 | LED4 4 / LED3 3 | IPM temperature too high |
- Reported by
- Low-static duct TIMER LED4 and RUNNING LED3
- Shown as
- LED4 4 / LED3 3
- Source meaning
- IPM temperature too high
Low/medium-static duct PCB 0151800644 LED4 / LED3PCB 0151800644 · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 21
| Reported by | Shown as | Source meaning |
|---|---|---|
| Low/medium-static duct TIMER LED4 and RUNNING LED3 | LED4 4 / LED3 3 | IPM temperature too high |
- Reported by
- Low/medium-static duct TIMER LED4 and RUNNING LED3
- Shown as
- LED4 4 / LED3 3
- Source meaning
- IPM temperature too high
Low/medium-static duct panel on PCB 0151800644PCB 0151800644 · Panels P1B-890IA/D, P1B-1210IA/D · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 21
| Reported by | Shown as | Source meaning |
|---|---|---|
| Low/medium-static duct panel display | F23 | IPM temperature too high |
- Reported by
- Low/medium-static duct panel display
- Shown as
- F23
- Source meaning
- IPM temperature too high
AC ceiling/floor TIMER LED6 / RUNNING LED1Models AC35S2SG1FA, AC50S2SG1FA, AC71S2SG1FA, AC90S2SH1FA, AC105S2SH1FA, AC125S2SK1FA, AC140S2SK1FA, AC160S2SK1FA · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 23
| Reported by | Shown as | Source meaning |
|---|---|---|
| AC ceiling/floor TIMER LED6 and RUNNING LED1 | LED6 4 / LED1 3 | IPM temperature too high |
- Reported by
- AC ceiling/floor TIMER LED6 and RUNNING LED1
- Shown as
- LED6 4 / LED1 3
- Source meaning
- IPM temperature too high
AC ceiling/floor displayModels AC35S2SG1FA, AC50S2SG1FA, AC71S2SG1FA, AC90S2SH1FA, AC105S2SH1FA, AC125S2SK1FA, AC140S2SK1FA, AC160S2SK1FA · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 23
| Reported by | Shown as | Source meaning |
|---|---|---|
| AC ceiling/floor display | F23 | IPM temperature too high |
- Reported by
- AC ceiling/floor display
- Shown as
- F23
- Source meaning
- IPM temperature too high
AF floor TIMER LED6 / RUNNING LED1Models AF25S2SD1FA, AF35S2SD1FA, AF42S2SD1FA · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 24
| Reported by | Shown as | Source meaning |
|---|---|---|
| AF floor TIMER LED6 and RUNNING LED1 | LED6 4 / LED1 3 | IPM temperature too high |
- Reported by
- AF floor TIMER LED6 and RUNNING LED1
- Shown as
- LED6 4 / LED1 3
- Source meaning
- IPM temperature too high
AF floor displayModels AF25S2SD1FA, AF35S2SD1FA, AF42S2SD1FA · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 24
| Reported by | Shown as | Source meaning |
|---|---|---|
| AF floor display | F23 | IPM temperature too high |
- Reported by
- AF floor display
- Shown as
- F23
- Source meaning
- IPM temperature too high
Source-labelled cassette TIMER / RUNNING LEDsSource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 25
| Reported by | Shown as | Source meaning |
|---|---|---|
| Cassette TIMER and RUNNING LEDs | TIMER 4 / RUNNING 3 | IPM temperature too high |
- Reported by
- Cassette TIMER and RUNNING LEDs
- Shown as
- TIMER 4 / RUNNING 3
- Source meaning
- IPM temperature too high
Source-labelled cassette displaySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 25
| Reported by | Shown as | Source meaning |
|---|---|---|
| Cassette display | 2B | IPM temperature too high |
- Reported by
- Cassette display
- Shown as
- 2B
- Source meaning
- IPM temperature too high
What to do now
Use these steps to record evidence and match the installed model to its service manual before diagnosis or a repair quote.
Record 23 and match the service manual
Record 23 and stop there; the source table gives no customer reset procedure. Arrange diagnosis with the matching service manual.
No manufacturer reset steps listed for 23
Capture the complete 23 error code and model stickers first. The source table lists the meaning but no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
23 error code, a clear display photo, Haier indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Singapore / model note | Official Haier America MRV-S MVHP service-manual row. Confirm the exact MVHP outdoor model and reporting display; no universal Singapore-model parity is claimed. |
| Singapore / model note | Official Haier Australia S2 split-system manual row. Confirm the exact 1U S2 outdoor model before using the meaning; no universal Haier-model parity is claimed. |
| Singapore / model note | Official Haier Appliances FlexFit Pro large-cassette display decoder. The source converts an outdoor decimal fault to the hexadecimal code flashed indoors; the exact display identity is retained. Match the named model family before diagnosis. |
- Source detail
- Singapore / model note
- What it says
- Official Haier America MRV-S MVHP service-manual row. Confirm the exact MVHP outdoor model and reporting display; no universal Singapore-model parity is claimed.
- Source detail
- Singapore / model note
- What it says
- Official Haier Australia S2 split-system manual row. Confirm the exact 1U S2 outdoor model before using the meaning; no universal Haier-model parity is claimed.
- Source detail
- Singapore / model note
- What it says
- Official Haier Appliances FlexFit Pro large-cassette display decoder. The source converts an outdoor decimal fault to the hexadecimal code flashed indoors; the exact display identity is retained. Match the named model family before diagnosis.
What to check before repair
The source table establishes the code meaning, not a repair procedure. Capture evidence first; model-specific tests belong to the matching service manual.
| You can check | Technician should confirm |
|---|---|
| Photograph the complete 23 error code before taking any action. | Confirm 23 exactly and record which controller, gateway, or unit reported it. |
| Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it. | Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope. |
| The source table provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action. | Follow the matching service-manual procedure and keep measured test evidence before naming a failed part. |
- You can check
- Photograph the complete 23 error code before taking any action.
- Technician should confirm
- Confirm 23 exactly and record which controller, gateway, or unit reported it.
- You can check
- Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it.
- Technician should confirm
- Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope.
- You can check
- The source table provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action.
- Technician should confirm
- Follow the matching service-manual procedure and keep measured test evidence before naming a failed part.
Source-bounded repair decision
Haier 23 confirms the source-table fault label, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.
Whether the reporting controller or unit and exact installed model are confirmed.
What the matching service-manual procedure and measured tests show.
Whether the proposed repair names the evidence for the failed part or condition.
Haier 23 questions
What does the Haier 23 error mean?
Haier 23 is listed as discharge-temperature sensor Td failure, compressor driver-module overtemperature protection, and communication failure between the indoor and outdoor units in MRV-S MVHP outdoor unit, S2 R32 split-system outdoor unit, FlexFit Pro large cassette, MRV5 AV08-AV26IMVEVA - outdoor failure table, 2024 1U90-1U160 S2 outdoor units, and 2024 3U / 4U / 5U S2 multi-split outdoor units source rows. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Can I fix a Haier 23 error myself?
No. 23 needs a technician's measurement before parts are decided. Photograph the complete 23 error code before taking any action. Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it.
Is it safe to keep running the aircon with a 23 error?
Record 23 and stop there; the source table gives no customer reset procedure. Arrange diagnosis with the matching service manual.
What causes a Haier 23 error?
Haier 23 has source-backed wording that depends on the exact model, source row, or reporting unit. Use the decoder on this page before assuming a specific cause.
Will a Haier 23 error need a repair or a full replacement?
Haier 23 confirms the source-table fault label, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.
What should I send a technician about a Haier 23 error?
Before booking, send: 23 error code, a clear display photo, Haier indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared.
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Haier list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use this quote-check guide only after the matching service manual identifies the diagnostic path.