TOSOT Model-Family Aircon F2 Error Code & Blinking Light

What does TOSOT F2 mean?

TOSOT model-family F2 is listed as indoor evaporator-temperature sensor open or short circuit and condenser-temperature sensor error in the Lomo 38 wall-mounted, Charmo wall-mounted, UNIX 16 ducted, and UNIX 20 ducted fault lists. This meaning comes from the manufacturer's own diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.

What to do now

Use these steps to record evidence and match the installed model to its service manual before diagnosis or a repair quote.

Record F2 and match the service manual
Record F2 and stop there; the manufacturer gives no customer reset procedure. Arrange diagnosis with the matching service manual.
No manufacturer reset steps listed for F2
Capture the complete F2 error code and blinking light and model stickers first. The manufacturer lists the meaning but no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
F2 error code and blinking light, a clear display photo and blinking-light video if the unit shows one, TOSOT model-family indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared

Choose the listing that matches your unit

The same code has more than one listed meaning. Match the model family, the system type and the unit that shows the code before approving parts.

Code, what it means, and what to check first
Code	What it means	What to check first
Lomo 38 wall-mounted / Charmo wall-mounted	Indoor evaporator-temperature sensor open or short circuit	Match this meaning to your installed model and the unit that shows the code, then use the checks below.
UNIX 16 ducted / UNIX 20 ducted	Condenser-temperature sensor error	Match this meaning to your installed model and the unit that shows the code, then use the checks below.

Code
Lomo 38 wall-mounted / Charmo wall-mounted
What it means
Indoor evaporator-temperature sensor open or short circuit
What to check first
Match this meaning to your installed model and the unit that shows the code, then use the checks below.
Code
UNIX 16 ducted / UNIX 20 ducted
What it means
Condenser-temperature sensor error
What to check first
Match this meaning to your installed model and the unit that shows the code, then use the checks below.

Guidance for your model

Notes that match the code to your exact model. Electrical, refrigerant, wiring, resistance and component checks are for a technician.

Guidance for your model
Detail	What it says
Singapore / model note	TOSOT Lomo 38 Service Manual listing. Confirm the complete model number before applying this model-family meaning.
Singapore / model note	TOSOT Charmo Service Manual listing. Confirm the complete model number before applying this model-family meaning.
Singapore / model note	TOSOT UNIX 16 Service Manual listing. Confirm the complete model number before applying this model-family meaning.

Detail
Singapore / model note
What it says
TOSOT Lomo 38 Service Manual listing. Confirm the complete model number before applying this model-family meaning.
Detail
Singapore / model note
What it says
TOSOT Charmo Service Manual listing. Confirm the complete model number before applying this model-family meaning.
Detail
Singapore / model note
What it says
TOSOT UNIX 16 Service Manual listing. Confirm the complete model number before applying this model-family meaning.

What to check before repair

The manufacturer's fault table gives the code's meaning, not a repair procedure. Capture evidence first; model-specific tests belong to the matching service manual.

Homeowner checks and technician confirmations
You can check	Technician should confirm
Photograph the complete F2 error code and blinking light before taking any action.	Confirm F2 exactly and record which controller, gateway, or unit reported it.
Capture the TOSOT model-family indoor and outdoor model stickers and identify which controller or unit reported it.	Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope.
The manufacturer provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action.	Follow the matching service-manual procedure and keep measured test evidence before naming a failed part.

You can check
Photograph the complete F2 error code and blinking light before taking any action.
Technician should confirm
Confirm F2 exactly and record which controller, gateway, or unit reported it.
You can check
Capture the TOSOT model-family indoor and outdoor model stickers and identify which controller or unit reported it.
Technician should confirm
Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope.
You can check
The manufacturer provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action.
Technician should confirm
Follow the matching service-manual procedure and keep measured test evidence before naming a failed part.

Source-bounded repair decision

TOSOT model-family F2 confirms the fault label the manufacturer lists, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.

Whether the reporting controller or unit and exact installed model are confirmed.
What the matching service-manual procedure and measured tests show.
Whether the proposed repair names the evidence for the failed part or condition.

TOSOT F2 questions

What does the TOSOT F2 error mean?

TOSOT model-family F2 is listed as indoor evaporator-temperature sensor open or short circuit and condenser-temperature sensor error in the Lomo 38 wall-mounted, Charmo wall-mounted, UNIX 16 ducted, and UNIX 20 ducted fault lists. This meaning comes from the manufacturer's own diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.

Can I fix a TOSOT F2 error myself?

No. F2 needs a technician's measurement before parts are decided. Photograph the complete F2 error code and blinking light before taking any action. Capture the TOSOT model-family indoor and outdoor model stickers and identify which controller or unit reported it.

Is it safe to keep running the aircon with an F2 error?

Record F2 and stop there; the manufacturer gives no customer reset procedure. Arrange diagnosis with the matching service manual.

What causes a TOSOT F2 error?

TOSOT F2 has a listed meaning that depends on the exact model and on which unit shows the code. Use the decoder on this page before assuming a specific cause.

Will a TOSOT F2 error need a repair or a full replacement?

TOSOT model-family F2 confirms the fault label the manufacturer lists, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.

What should I send a technician about a TOSOT F2 error?

Before booking, send: F2 error code and blinking light, a clear display photo and blinking-light video if the unit shows one, TOSOT model-family indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared.

Where to go next

Confirm the fault

Share the error code, model number and symptoms so we can assess the likely cause.

Not the right code?

Browse the full TOSOT list or check a few codes in the same fault category.