York Aircon F6 Error Code & Blinking Light
Use this York F6 guide to capture the fault correctly and see what should be checked before parts are quoted.
What does York F6 mean?
York F6 is listed as overload limit or drop frequency in Inverter Split, Multi-Split rows such as York P Series 9K-12K 115V wall-mounted ductless. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Compressor start, lock, overcurrent, overload, or inverter-drive protection.
Power-module, IPM, voltage, or wiring fault affecting compressor drive.
Compressor mechanical or winding issue after electrical checks are confirmed.
What to do now
Use these steps before customer action or a parts quote.
Treat it as a fault signal
Stop repeated restarts if F6 returns; compressor and inverter faults can become more expensive when forced to run.
No manufacturer reset steps listed for F6
Capture the complete F6 pattern and model stickers first. The selected source row lists no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
F6 error code and blinking light, a clear display photo and blinking-light video if the unit shows one, York model stickers, affected rooms, operating state when the code appeared, and trip timing and outdoor-unit behaviour
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Diagnostic note | Check overload causes, outdoor airflow, voltage, and compressor load if cooling output drops. |
| Singapore / model note | YorkNow / Johnson Controls P Series technical-guide row. Use for the listed P Series 9K-12K 115V wall-mounted ductless family, not as a Singapore YHFF fault-code table. |
- Source detail
- Diagnostic note
- What it says
- Check overload causes, outdoor airflow, voltage, and compressor load if cooling output drops.
- Source detail
- Singapore / model note
- What it says
- YorkNow / Johnson Controls P Series technical-guide row. Use for the listed P Series 9K-12K 115V wall-mounted ductless family, not as a Singapore YHFF fault-code table.
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before taking any system action on F6, take a clear display photo and blinking-light video if the unit shows one. | Confirm whether F6 is compressor start, overload, lock, or drive protection. |
| Capture the York indoor and outdoor model stickers so the correct family row is used. | Check supply voltage, inverter output, IPM status, compressor current, and winding readings. |
| The selected source row lists no customer reset procedure. Note whether one room, several rooms, or the whole system is affected. | Review trip history and compressor mechanical signs before quoting replacement. |
- You can check
- Before taking any system action on F6, take a clear display photo and blinking-light video if the unit shows one.
- Technician should confirm
- Confirm whether F6 is compressor start, overload, lock, or drive protection.
- You can check
- Capture the York indoor and outdoor model stickers so the correct family row is used.
- Technician should confirm
- Check supply voltage, inverter output, IPM status, compressor current, and winding readings.
- You can check
- The selected source row lists no customer reset procedure. Note whether one room, several rooms, or the whole system is affected.
- Technician should confirm
- Review trip history and compressor mechanical signs before quoting replacement.
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows F6. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same F6 fault. | Prioritise the shared outdoor side, power path, and source-listed system branch. |
| The outdoor unit hums, starts briefly, or trips soon after startup. | Power, inverter, IPM, compressor current, and winding checks decide the repair path. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to Inverter Split, Multi-Split rows such as York P Series 9K-12K 115V wall-mounted ductless. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
- What you see
- Only one indoor unit shows F6.
- What it points to
- The affected room, indoor board path, wiring route, or local component should be checked first.
- What you see
- Several rooms or the outdoor unit show the same F6 fault.
- What it points to
- Prioritise the shared outdoor side, power path, and source-listed system branch.
- What you see
- The outdoor unit hums, starts briefly, or trips soon after startup.
- What it points to
- Power, inverter, IPM, compressor current, and winding checks decide the repair path.
- What you see
- The model family is different from the row you found online.
- What it points to
- Use the model or series filter first; same-looking codes can still belong to different diagnostic tables.
- What you see
- The model belongs to Inverter Split, Multi-Split rows such as York P Series 9K-12K 115V wall-mounted ductless.
- What it points to
- The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts.
Compressor drive or replacement decision
York F6 can still be a repair if power, inverter, or module checks find the cause. Compressor replacement should be weighed against age, warranty, and the rest of the system condition.
Inverter or IPM faults are not the same as confirmed compressor mechanical failure.
Compressor winding and current readings should be measured before replacement is discussed.
Older systems need a repair-versus-replace check if compressor-side parts are expensive.
York F6 questions
What does the York F6 error mean?
Can I fix a York F6 error myself?
Is it safe to keep running the aircon with an F6 error?
What causes a York F6 error?
Will a York F6 error need a repair or a full replacement?
What should I send a technician about a York F6 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full York list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.