Panasonic CU-2XU20YBZ
The outdoor unit of a 4.47 kW multi split system, rated 5 green ticks. Costs about $38 a month to run — here is how that compares with every other system its size on Singapore's NEA register. Also registered as CU-2XU20YBZ-H.
Is the CU-2XU20YBZ expensive to run?
Not really — it's on the better side of average. Of the 15 systems on Singapore's register around this size, 5 cost less to run.
Runs at
$38/month
About $454 a year
Cheapest its size
$33/month
Daikin MKM50ZVMG
Size group
4.1–4.8 kW
15 systems, all brands
That is about $4 a month more than the cheapest system its size, or roughly $530 over ten years — before you weigh purchase price, which often runs the other way.
Looking at the CU-2XU20YBZ for your home?
This is the outdoor unit only, and on a multi-split it is shared across rooms. What decides the job is what goes inside them.
What to pin down before you commit
- One indoor model number per room, not just a room count
- The capacity of each indoor unit, and which room it serves
- Whether every room can run at once at full output, or the system is sized for typical use
- What happens to the existing piping and drainage, and whether it is being reused
A multi-split can be built many ways, and the register carries one figure per registration. The running cost above is for the configuration NEA tested — yours depends on how many indoor units end up on it and how hard they work.
Figures are NEA energy-label records checked 17 Sept 2026, priced at the label's 27¢/kWh assumption. Your own bill depends on how you actually use it. Already have one installed and seeing a fault code? Look it up here, or Compare every registered model. More on Panasonic systems, or read up on Common aircon problems.
Panasonic CU-2XU20YBZ questions
What size home is the CU-2XU20YBZ suited to?
What does the 5-tick rating on the CU-2XU20YBZ mean?
Is the CU-2XU20YBZ a single-split or multi-split system?
Is the Panasonic CU-2XU20YBZ still on the NEA register?
How efficient is the CU-2XU20YBZ at part load?
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.