Haier MRV-S aircon 116 error code
Use this Haier MRV-S 116 error code guide to confirm the source table meaning, capture the reporting equipment and model, and match the service manual before diagnosis.
What does Haier 116 mean?
Haier MRV-S 116 is listed as communication failure between inverter and control PCB in MRV-S MVHP outdoor unit source row. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
The source table names the displayed fault but does not list its root causes.
The reporting equipment and exact installed model determine which service procedure applies.
A cause should be recorded only after the matching service-manual checks are completed.
What to do now
Use these steps to record evidence and match the installed model to its service manual before diagnosis or a repair quote.
Record 116 and match the service manual
Record 116 and stop there; the source table gives no customer reset procedure. Arrange diagnosis with the matching service manual.
No manufacturer reset steps listed for 116
Capture the complete 116 error code and model stickers first. The source table lists the meaning but no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
116 error code, a clear display photo, Haier MRV-S indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Singapore / model note | Official Haier America MRV-S MVHP service-manual row. Confirm the exact MVHP outdoor model and reporting display; no universal Singapore-model parity is claimed. |
What to check before repair
The source table establishes the code meaning, not a repair procedure. Capture evidence first; model-specific tests belong to the matching service manual.
| You can check | Technician should confirm |
|---|---|
| Photograph the complete 116 error code before taking any action. | Confirm 116 exactly and record which controller, gateway, or unit reported it. |
| Capture the Haier MRV-S indoor and outdoor model stickers and identify which controller or unit reported it. | Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope. |
| The source table provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action. | Follow the matching service-manual procedure and keep measured test evidence before naming a failed part. |
What changes the next step
These checks confirm source applicability and evidence without treating the code table as a repair flow.
| What you see | What it points to |
|---|---|
| The complete 116 code and reporting equipment are recorded. | Use the source-table meaning as the starting point; the code alone does not identify a failed part. |
| The installed model and source family are confirmed. | Use only the matching service-manual procedure for diagnosis and any permitted system action. |
| A quote names a part, setting change, or refrigerant work from the code alone. | Ask for the model-specific test result that supports it before approving the work. |
Source-bounded repair decision
Haier MRV-S 116 confirms the source-table fault label, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.
Whether the reporting controller or unit and exact installed model are confirmed.
What the matching service-manual procedure and measured tests show.
Whether the proposed repair names the evidence for the failed part or condition.
Haier 116 questions
What does the Haier 116 error mean?
Can I fix a Haier 116 error myself?
Is it safe to keep running the aircon with a 116 error?
What causes a Haier 116 error?
Will a Haier 116 error need a repair or a full replacement?
What should I send a technician about a Haier 116 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Haier list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use this quote-check guide only after the matching service manual identifies the diagnostic path.