Haier Aircon 33 Error Code
Use this Haier 33 error code guide to confirm the source table meaning, capture the reporting equipment and model, and match the service manual before diagnosis. Match the model first; same-looking codes can point to different rows.
What does Haier 33 mean?
Haier 33 is listed as outdoor EEPROM failure, AT24C04 EEPROM communication failure, and AT24C04 EEPROM data-check failure for model code or checksum in MRV-S MVHP outdoor unit, MRV5 AV08-AV26IMVEVA - outdoor failure table, and 2024 3U / 4U / 5U S2 multi-split outdoor units source rows. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the matching source row
The same visible code has more than one source-backed meaning. Match the model family, system type, or reporting unit before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| MRV-S MVHP outdoor unit | Outdoor EEPROM failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MRV5 AV08-AV26IMVEVA - outdoor failure table — AT24C04 EEPROM communication failure | AT24C04 EEPROM communication failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MRV5 AV08-AV26IMVEVA - outdoor failure table — AT24C04 EEPROM data-check failure for model code or checksum | AT24C04 EEPROM data-check failure for model code or checksum | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MRV5 AV08-AV26IMVEVA - outdoor failure table — AT24C04 EEPROM data-check failure for out-of-limit data or reverse sequence | AT24C04 EEPROM data-check failure for out-of-limit data or reverse sequence | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| 2024 3U / 4U / 5U S2 multi-split outdoor units | Indoor unit B gas-pipe temperature sensor failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
- Code
- MRV-S MVHP outdoor unit
- What it means
- Outdoor EEPROM failure
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- MRV5 AV08-AV26IMVEVA - outdoor failure table — AT24C04 EEPROM communication failure
- What it means
- AT24C04 EEPROM communication failure
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- MRV5 AV08-AV26IMVEVA - outdoor failure table — AT24C04 EEPROM data-check failure for model code or checksum
- What it means
- AT24C04 EEPROM data-check failure for model code or checksum
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- MRV5 AV08-AV26IMVEVA - outdoor failure table — AT24C04 EEPROM data-check failure for out-of-limit data or reverse sequence
- What it means
- AT24C04 EEPROM data-check failure for out-of-limit data or reverse sequence
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
- Code
- 2024 3U / 4U / 5U S2 multi-split outdoor units
- What it means
- Indoor unit B gas-pipe temperature sensor failure
- What to check first
- Match this row to the installed model or reporting unit, then use the source-specific checks below.
How this fault may be shown
Match every scope item the source provides—exact model where listed, PCB or panel where listed, and reporting device—before using a displayed value. These manufacturer crosswalks are display evidence, not universal codes or repair instructions.
Multi-Split wired controller YR-E17 / YR-E17ASource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 17
| Reported by | Shown as |
|---|---|
| Wired controller YR-E17 or YR-E17A | 35 |
- Reported by
- Wired controller YR-E17 or YR-E17A
- Shown as
- 35
Multi-Split wired controller YR-E16 familySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 17
| Reported by | Shown as |
|---|---|
| Wired controller YR-E16, YR-E16A, or YR-E16B | 53 |
- Reported by
- Wired controller YR-E16, YR-E16A, or YR-E16B
- Shown as
- 53
Multi-Split cassette air-conditioner displaySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 17
| Reported by | Shown as |
|---|---|
| Cassette air-conditioner display | 35 |
- Reported by
- Cassette air-conditioner display
- Shown as
- 35
Multi-Split cassette TIMER LED5 / RUNNING LED1Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 17
| Reported by | Shown as |
|---|---|
| Cassette unit TIMER LED5 and RUNNING LED1 | LED5 5 / LED1 3 |
- Reported by
- Cassette unit TIMER LED5 and RUNNING LED1
- Shown as
- LED5 5 / LED1 3
Multi-Split ceiling-floor, cassette, or duct LED4 / LED3Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 17
| Reported by | Shown as |
|---|---|
| Ceiling-floor, cassette, or duct unit TIMER LED4 and RUNNING LED3 | LED4 5 / LED3 3 |
- Reported by
- Ceiling-floor, cassette, or duct unit TIMER LED4 and RUNNING LED3
- Shown as
- LED4 5 / LED3 3
Multi-Split wall-unit displaySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 17
| Reported by | Shown as |
|---|---|
| Wall-unit display | F30 |
- Reported by
- Wall-unit display
- Shown as
- F30
Multi-Split alternate table wired controller YR-E17 / YR-E17ASource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 19
| Reported by | Shown as |
|---|---|
| Wired controller YR-E17 or YR-E17A | 35 |
- Reported by
- Wired controller YR-E17 or YR-E17A
- Shown as
- 35
Multi-Split alternate table wired controller YR-E16 familySource-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 19
| Reported by | Shown as |
|---|---|
| Wired controller YR-E16, YR-E16A, or YR-E16B | 53 |
- Reported by
- Wired controller YR-E16, YR-E16A, or YR-E16B
- Shown as
- 53
Multi-Split duct TIMER LED4 / RUNNING LED3Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 19
| Reported by | Shown as |
|---|---|
| Duct unit TIMER LED4 and RUNNING LED3 | LED4 5 / LED3 3 |
- Reported by
- Duct unit TIMER LED4 and RUNNING LED3
- Shown as
- LED4 5 / LED3 3
Multi-Split ceiling-floor or cassette TIMER LED6 / RUNNING LED1Source-labelled equipment family; exact models are not listed in this table · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 19
| Reported by | Shown as |
|---|---|
| Ceiling-floor or cassette unit TIMER LED6 and RUNNING LED1 | LED6 5 / LED1 3 |
- Reported by
- Ceiling-floor or cassette unit TIMER LED6 and RUNNING LED1
- Shown as
- LED6 5 / LED1 3
Multi-Split panel display on PCB 0151800644PCB 0151800644 · Haier Split and Multi Split Error Codes, version 01/2024, PDF page 19
| Reported by | Shown as |
|---|---|
| Duct, ceiling-floor, or cassette panel display | F33 |
- Reported by
- Duct, ceiling-floor, or cassette panel display
- Shown as
- F33
What to do now
Use these steps to record evidence and match the installed model to its service manual before diagnosis or a repair quote.
Record 33 and match the service manual
Record 33 and stop there; the source table gives no customer reset procedure. Arrange diagnosis with the matching service manual.
No manufacturer reset steps listed for 33
Capture the complete 33 error code and model stickers first. The source table lists the meaning but no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
33 error code, a clear display photo, Haier indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Singapore / model note | Official Haier America MRV-S MVHP service-manual row. Confirm the exact MVHP outdoor model and reporting display; no universal Singapore-model parity is claimed. |
| Singapore / model note | Official regional Haier MRV5 row from outdoor-unit manual 0150525031. Confirm an AV08IMVEVA through AV26IMVEVA system, the reporting unit, and the complete suffix. The source does not enumerate connected indoor models and is not claimed to cover every Haier system or establish universal Singapore-model parity. |
| Singapore / model note | Regional manufacturer handbook, PDF page 15. Confirm the exact listed model and reporting display; this meaning is not claimed for every Haier system. |
- Source detail
- Singapore / model note
- What it says
- Official Haier America MRV-S MVHP service-manual row. Confirm the exact MVHP outdoor model and reporting display; no universal Singapore-model parity is claimed.
- Source detail
- Singapore / model note
- What it says
- Official regional Haier MRV5 row from outdoor-unit manual 0150525031. Confirm an AV08IMVEVA through AV26IMVEVA system, the reporting unit, and the complete suffix. The source does not enumerate connected indoor models and is not claimed to cover every Haier system or establish universal Singapore-model parity.
- Source detail
- Singapore / model note
- What it says
- Regional manufacturer handbook, PDF page 15. Confirm the exact listed model and reporting display; this meaning is not claimed for every Haier system.
What to check before repair
The source table establishes the code meaning, not a repair procedure. Capture evidence first; model-specific tests belong to the matching service manual.
| You can check | Technician should confirm |
|---|---|
| Photograph the complete 33 error code before taking any action. | Confirm 33 exactly and record which controller, gateway, or unit reported it. |
| Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it. | Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope. |
| The source table provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action. | Follow the matching service-manual procedure and keep measured test evidence before naming a failed part. |
- You can check
- Photograph the complete 33 error code before taking any action.
- Technician should confirm
- Confirm 33 exactly and record which controller, gateway, or unit reported it.
- You can check
- Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it.
- Technician should confirm
- Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope.
- You can check
- The source table provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action.
- Technician should confirm
- Follow the matching service-manual procedure and keep measured test evidence before naming a failed part.
Source-bounded repair decision
Haier 33 confirms the source-table fault label, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.
Whether the reporting controller or unit and exact installed model are confirmed.
What the matching service-manual procedure and measured tests show.
Whether the proposed repair names the evidence for the failed part or condition.
Haier 33 questions
What does the Haier 33 error mean?
Can I fix a Haier 33 error myself?
Is it safe to keep running the aircon with a 33 error?
What causes a Haier 33 error?
Will a Haier 33 error need a repair or a full replacement?
What should I send a technician about a Haier 33 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Haier list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use this quote-check guide only after the matching service manual identifies the diagnostic path.