Haier Aircon FC Error Code
Confirm the listed meaning of Haier FC, note the unit that shows the code and its model, and match the service manual before diagnosis.
Understand this fault
- 5.0Google & Carousell
- BCARegistered
- 15,000+Jobs Completed
What does Haier FC mean?
Haier FC is listed as indoor pipe temperature is too high in the 2024 AP140 / AP160 S2 SK1 ducted indoor units fault list. This meaning comes from the manufacturer's own diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
What to do now
Use these steps to record evidence and match the installed model to its service manual before diagnosis or a repair quote.
Record FC and match the service manual
Record FC and stop there; the manufacturer gives no customer reset procedure. Arrange diagnosis with the matching service manual.
No manufacturer reset steps listed for FC
Capture the complete FC error code and model stickers first. The manufacturer lists the meaning but no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
FC error code, a clear display photo, Haier indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared
Full manufacturer meaning
The lookup uses a concise label. The manufacturer's complete wording below preserves model-dependent alternatives for diagnosis.
| Code | What it means | What to check first |
|---|---|---|
| Full manufacturer meaning | Indoor pipe temperature is too high. Shown as: error display: FC; indoor PCB: LED6 0 / LED1 not listed. | The source reports this code from haier error display or indoor control-board leds. Confirm the installed model because the alternatives can be model-dependent. |
- Code
- Full manufacturer meaning
- What it means
- Indoor pipe temperature is too high. Shown as: error display: FC; indoor PCB: LED6 0 / LED1 not listed.
- What to check first
- The source reports this code from haier error display or indoor control-board leds. Confirm the installed model because the alternatives can be model-dependent.
Guidance for your model
Notes that match the code to your exact model. Electrical, refrigerant, wiring, resistance and component checks are for a technician.
| Detail | What it says |
|---|---|
| Singapore / model note | Regional manufacturer handbook, PDF page 10. Confirm the exact listed model and reporting display; this meaning is not claimed for every Haier system. |
- Detail
- Singapore / model note
- What it says
- Regional manufacturer handbook, PDF page 10. Confirm the exact listed model and reporting display; this meaning is not claimed for every Haier system.
What to check before repair
The manufacturer's fault table gives the code's meaning, not a repair procedure. Capture evidence first; model-specific tests belong to the matching service manual.
| You can check | Technician should confirm |
|---|---|
| Photograph the complete FC error code before taking any action. | Confirm FC exactly and record which controller, gateway, or unit reported it. |
| Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it. | Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope. |
| The manufacturer provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action. | Follow the matching service-manual procedure and keep measured test evidence before naming a failed part. |
- You can check
- Photograph the complete FC error code before taking any action.
- Technician should confirm
- Confirm FC exactly and record which controller, gateway, or unit reported it.
- You can check
- Capture the Haier indoor and outdoor model stickers and identify which controller or unit reported it.
- Technician should confirm
- Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope.
- You can check
- The manufacturer provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action.
- Technician should confirm
- Follow the matching service-manual procedure and keep measured test evidence before naming a failed part.
Source-bounded repair decision
Haier FC confirms the fault label the manufacturer lists, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.
Whether the reporting controller or unit and exact installed model are confirmed.
What the matching service-manual procedure and measured tests show.
Whether the proposed repair names the evidence for the failed part or condition.