What does LG CH01 mean?
LG CH01 is listed as indoor unit room temperature sensor error, indoor unit return air thermistor disconnected or shorted, and indoor unit: Indoor return-air or remote wall temperature sensor communication error in Wall-Mounted Split, VRF, Cassette rows such as HSV4 / HSV5 single-zone wall-mounted systems, LS091HSV / LS121HSV wall-mounted single-zone. This meaning comes from the manufacturer's own diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
What to do now
Use these steps before customer action, a sensor check, or PCB quote.
Treat it as a fault signal
If CH01 remains displayed or cooling is still abnormal, preserve the code and arrange diagnosis.
No manufacturer reset steps listed for CH01
Capture the complete CH01 pattern and model stickers first. The manufacturer lists no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
CH01 error code and blinking light, a clear display photo and blinking-light video if the unit shows one, LG model stickers, affected rooms, operating state when the code appeared, and when the fault appears
Choose the listing that matches your unit
The same code has more than one listed meaning. Match the model family, the system type and the unit that shows the code before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| HSV4 / HSV5 single-zone wall-mounted systems | Indoor unit room temperature sensor error | Match this meaning to your installed model and the unit that shows the code, then use the checks below. |
| LS091HSV / LS121HSV wall-mounted single-zone | Indoor unit return air thermistor disconnected or shorted | Match this meaning to your installed model and the unit that shows the code, then use the checks below. |
| LG Multi V 5 commercial VRF | indoor unit: Indoor return-air or remote wall temperature sensor communication error | Match this meaning to your installed model and the unit that shows the code, then use the checks below. |
- Code
- HSV4 / HSV5 single-zone wall-mounted systems
- What it means
- Indoor unit room temperature sensor error
- What to check first
- Match this meaning to your installed model and the unit that shows the code, then use the checks below.
- Code
- LS091HSV / LS121HSV wall-mounted single-zone
- What it means
- Indoor unit return air thermistor disconnected or shorted
- What to check first
- Match this meaning to your installed model and the unit that shows the code, then use the checks below.
- Code
- LG Multi V 5 commercial VRF
- What it means
- indoor unit: Indoor return-air or remote wall temperature sensor communication error
- What to check first
- Match this meaning to your installed model and the unit that shows the code, then use the checks below.
Guidance for your model
Notes that match the code to your exact model. Electrical, refrigerant, wiring, resistance and component checks are for a technician.
| Detail | What it says |
|---|---|
| Diagnostic note | Record CH01 and arrange indoor room-temperature sensor and connector diagnosis if the code returns after a power reset. |
| Diagnostic note | Record the exact code and LED blink pattern before booking diagnosis. For LS091HSV / LS121HSV systems, this pattern points to: Indoor unit return air thermistor disconnected or shorted |
| Diagnostic note | Record 01 and confirm that the indoor unit reported it. Have an authorised LG VRF technician check the named sensor, connector, harness, and service-manual readings before replacing a board. |
| Singapore / model note | Official LG HVAC HSV4 / HSV5 wall-mounted self-diagnosis table. Use this row only for matching single-zone wall-mounted systems. |
| Singapore / model note | Use this LS091HSV / LS121HSV LED table only when the installed model or service manual matches this standard wall-mounted single-zone family. |
| Singapore / model note | LG Singapore lists Multi V 5, but the installed unit nameplate and matching service manual control. Do not apply this row to Multi V i or another LG family. |
- Detail
- Diagnostic note
- What it says
- Record CH01 and arrange indoor room-temperature sensor and connector diagnosis if the code returns after a power reset.
- Detail
- Diagnostic note
- What it says
- Record the exact code and LED blink pattern before booking diagnosis. For LS091HSV / LS121HSV systems, this pattern points to: Indoor unit return air thermistor disconnected or shorted
- Detail
- Diagnostic note
- What it says
- Record 01 and confirm that the indoor unit reported it. Have an authorised LG VRF technician check the named sensor, connector, harness, and service-manual readings before replacing a board.
- Detail
- Singapore / model note
- What it says
- Official LG HVAC HSV4 / HSV5 wall-mounted self-diagnosis table. Use this row only for matching single-zone wall-mounted systems.
- Detail
- Singapore / model note
- What it says
- Use this LS091HSV / LS121HSV LED table only when the installed model or service manual matches this standard wall-mounted single-zone family.
- Detail
- Singapore / model note
- What it says
- LG Singapore lists Multi V 5, but the installed unit nameplate and matching service manual control. Do not apply this row to Multi V i or another LG family.
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before taking any system action on CH01, take a clear display photo and blinking-light video if the unit shows one. | Confirm which sensor CH01 maps to on the exact model table. |
| Capture the LG indoor and outdoor model stickers so the correct family row is used. | Measure the sensor value against the service-manual resistance or voltage range. |
| The manufacturer lists no customer reset procedure for this code. Note whether one room, several rooms, or the whole system is affected. | Check connector condition, harness continuity, and PCB input before replacing boards. |
- You can check
- Before taking any system action on CH01, take a clear display photo and blinking-light video if the unit shows one.
- Technician should confirm
- Confirm which sensor CH01 maps to on the exact model table.
- You can check
- Capture the LG indoor and outdoor model stickers so the correct family row is used.
- Technician should confirm
- Measure the sensor value against the service-manual resistance or voltage range.
- You can check
- The manufacturer lists no customer reset procedure for this code. Note whether one room, several rooms, or the whole system is affected.
- Technician should confirm
- Check connector condition, harness continuity, and PCB input before replacing boards.
Sensor or PCB decision
LG CH01 is usually repair-first if a sensor or harness reading is confirmed. Board replacement should wait until the sensor circuit is tested.
Sensor replacement is usually targeted when resistance or voltage readings are out of range.
Harness or connector damage can look like a sensor fault until continuity is checked.
PCB replacement is a later step if the sensor and wiring test correctly.
LG CH01 questions
What does the LG CH01 error mean?
Can I fix a LG CH01 error myself?
Is it safe to keep running the aircon with a CH01 error?
What causes a LG CH01 error?
Will a LG CH01 error need a repair or a full replacement?
What should I send a technician about a LG CH01 error?
Where to go next
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full LG list or check a few codes in the same fault category.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.