LG aircon CH66 error code & blinking light
Use this LG CH66 guide to capture the fault correctly and see what should be checked before parts are quoted.
What does LG CH66 mean?
LG CH66 is listed as communication-line or piping-connection mismatch between indoor and outdoor units in Inverter Split, Multi-Split rows. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Loose, corroded, crossed, or damaged indoor-outdoor signal wiring.
Terminal block, connector, or junction fault on the indoor or outdoor side.
Indoor or outdoor PCB communication circuit fault after wiring is proven sound.
What to do now
Use these steps before customer action, a signal-wire check, or PCB quote.
Stop using the unit if CH66 returns
If CH66 remains displayed or returns during operation, do not attempt an unsourced reset; get the matching source row diagnosed.
No manufacturer reset steps listed for CH66
Capture the complete CH66 pattern and model stickers first. The selected source row lists no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
CH66 error code and blinking light, a clear display photo and blinking-light video if the unit shows one, LG model stickers, affected rooms, operating state when the code appeared, and whether one room or every room failed
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Diagnostic note | Communication-line or piping-connection mismatch between indoor and outdoor units. Most relevant after installation, relocation, or multi-split pipe/cable work. |
| Singapore / model note | Official LG help-library guide; check wiring and pipe matching before board diagnosis. |
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before taking any system action on CH66, take a clear display photo and blinking-light video if the unit shows one. | Match CH66 against the exact model-family source row before quoting parts. |
| Capture the LG indoor and outdoor model stickers so the correct family row is used. | Test communication terminals, cable continuity, polarity, and outdoor power. |
| The selected source row lists no customer reset procedure. Note whether one room, several rooms, or the whole system is affected. | Read indoor and outdoor PCB indicators only after the signal path is proven sound. |
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows CH66. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same CH66 fault. | Prioritise shared outdoor power, the communication trunk, terminal connections, and system controls. |
| The fault remains displayed or returns during operation. | Start with the source-row diagnostic branch before approving parts. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to Inverter Split, Multi-Split rows. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
Wiring or PCB decision
LG CH66 should start with terminal, signal-cable, and power checks. PCB replacement only makes sense after the communication path is proven sound.
A loose terminal or bad junction is a targeted repair once the path is confirmed.
Signal-wire replacement depends mostly on access through trunking, ceiling, or concealed routes.
PCB cost should be weighed against age only after wiring and power checks pass.
LG CH66 questions
What does the LG CH66 error mean?
Can I fix a LG CH66 error myself?
Is it safe to keep running the aircon with a CH66 error?
What causes a LG CH66 error?
Will a LG CH66 error need a repair or a full replacement?
What should I send a technician about a LG CH66 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full LG list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.