Skip to main content

Aircon PCB Replacement Cost: Indoor, Outdoor and Inverter

Board prices depend on which board failed. The indoor board on a wall unit is the cheapest; the outdoor and inverter boards cost more and are quoted per model.

On this page

How much does an aircon PCB replacement cost?

Snowflake publishes a rate range for the indoor board on a wall-mounted unit, beside a market range for board replacement. Outdoor and inverter boards are quoted, because few operators publish them.

Every price here is for a board fitted in place of the old one. Boards are not repaired.

Aircon PCB replacement cost by board
BoardMarket range in SingaporeOur rate
PCB replacement, board not specified by the operator$150–$400 per job
Indoor board, wall-mounted unit$180–$320
Outdoor boardOnly two operators publish a separate outdoor board price; it depends on the brand and model and is quoted once the board is identified.
Inverter boardNo three operators publish an inverter board price; supply for the exact model sets it.
Reconditioned instead of newOnly one operator prices reconditioned boards separately, so no range is given.
Diagnostic visit to confirm the board$30 / visit

Published board prices rarely say which board they cover. Brand and model move the price most, and outdoor and inverter boards sit above indoor ones.

Market ranges: published rates from 3 Singapore operators. Checked 18 Nov 2026.

Our rates are from our rate card.

Which board has failed

The symptom usually points to the board. The fault code narrows it further.

Indoor board faults show at the indoor unit: no response to the remote, a dead display or a fan that will not start. Outdoor and inverter board faults stop the outdoor unit while the indoor fan keeps running.

What moves the price

Brand and model matter most, because each board fits a narrow range of units. Supply for an older model can take longer or have run out.

  • Which board: indoor, outdoor or inverter.
  • Brand and model, and whether the board is still supplied.
  • New or reconditioned, and the warranty on the part.
  • Whether the fault came from a surge or a failed part that will kill a new board.

Board or new unit

A board on a young unit is a routine repair. On an older unit, an outdoor or inverter board starts the comparison with a new system.

The guide on replacing the board or the whole unit sets out that decision. Check the brand's warranty first, because a board inside general cover is usually free.

Confirming the board first

Wiring and sensors are tested before a board is quoted. Snowflake Aircon Services confirms the board with a diagnostic visit before ordering the part.

Common questions

How much does an aircon PCB replacement cost in Singapore?
The indoor board on a wall-mounted aircon is the cheapest PCB to replace, and Snowflake publishes a rate range for it. Outdoor and inverter boards cost more and are quoted per brand and model, because few Singapore operators publish a separate price for them.
Can an aircon PCB be repaired instead of replaced?
A failed aircon PCB is replaced, not repaired. A replacement board restores the original control logic and carries a part warranty, while a component-level repair leaves the rest of an ageing board in place. The price depends on which board failed and its supply.
How do I know which aircon board has failed?
Indoor board faults show at the indoor unit, such as no response to the remote or a dead display. Outdoor and inverter board faults usually stop the outdoor unit while the indoor fan keeps running. The fault code narrows it down before a board is ordered.
Is a PCB replacement worth it on an old aircon?
An indoor board on any aircon is usually worth replacing, because the part is small next to a new unit. An outdoor or inverter board on a unit older than ten years deserves a side-by-side with a new system quoted for those rooms.

Sources