Skip to main content

Singapore Commercial Lease Handover Aircon Defects Check

Signing a Singapore commercial office or retail handover form without testing landlord-supplied aircon equipment transfers hidden defects directly onto the incoming tenant. Logging fouled chilled-water FCUs, dead wall thermostats, disconnected flex ducts, and leaking tenant splits before key collection secures landlord rectification rights.

On this page

Critical chilled-water FCU and duct defects to photograph

Most Singapore Grade A and suburban office tenancies hand over bare-shell or fitted premises with existing landlord chilled-water FCUs hidden above ceiling grids. Previous tenant hacking often tears insulated flexible ducts, jams motorised two-way chilled-water valves, or buries condensate drains under renovation debris.

Walk the floor during live building chilled-water hours rather than after-hours viewing slots. Measuring supply diffuser air temperatures and lifting inspection hatches uncovers clogged strainers, sweating chilled-water headers, and silent fan motors before your defects-liability clock expires.

Critical chilled-water FCU and duct defects to photograph summary table
Handover componentCommon hidden defectEvidence to record
Chilled-water FCU & actuatorStuck valve or noisy bearingVideo sound plus supply-air thermometer reading
Wall thermostat & zone linkUnresponsive screen or miswired zoneSetpoint response test across each room
Inherited tenant splitsMissing servicing logs or rusty panOpen-flap coil photo and model serial plate

Checking inherited tenant splits and electrical isolators

Bare take-over units frequently inherit supplementary server-room splits or pantry units left behind by exiting tenants on an as-is basis. Check drain discharge points, outdoor condenser bracket rust, and whether control boards power up cleanly without error codes.

Do not flip tripped commercial isolators or attempt electrical resets during a walkthrough; note any dead breaker immediately on the joint defect sheet for the landlord electrician. Faulty control PCBs require direct board replacement, and non-Daikin VRF equipment should be verified for maintenance coverage early since only Daikin VRV receives repair support.

Documenting defects clearly before signing take-over

Timestamped photos, supply-temperature logs, and a written technical punch list give commercial tenants strong leverage during the standard 14-to-30-day handover window. Clear baseline proof also protects against unfair reinstatement charges when the lease eventually ends.

Reach the commercial team at Snowflake Aircon Services via WhatsApp with your building name and key-collection date to arrange a pre-signoff aircon defects report.

Common questions

Why should commercial tenants inspect aircons during daytime building hours?
Central chilled-water plants in Singapore office towers typically operate only during standard weekday business hours. Inspecting a unit after 6 pm prevents testing chilled-water valve actuators, real diffuser supply temperatures, and condensate drainage under full cooling load before signing handover forms.
Who pays to fix faulty landlord chilled-water FCUs found after handover?
Commercial leases generally hold landlords responsible for base-building chilled-water FCU defects logged within the handover defect period, whereas unreported faults discovered months later often shift onto tenant maintenance budgets. Recording baseline temperatures and valve operation before fit-out protects tenancy rights.
What checks matter most for inherited server-room or pantry split units?
Incoming commercial tenants should photograph external condenser brackets, confirm condensate drain flow, inspect indoor evaporator coil cleanliness, and record full model serial plates before accepting as-is splits. Checking spare parts availability and verifying recent servicing history avoids surprise repair bills during move-in week.
Should tenants test supply diffusers after partition renovation finishes?
Adding new meeting rooms or glass partitions routinely traps return airflow and unbalances original ceiling diffuser pressure across commercial floors. Conducting both a pre-fit-out handover audit and a post-renovation airflow check confirms every room receives rated cooling and SCDF-compliant ventilation.

Sources