Skip to main content

Daikin MKM85VVMG vs MKM100ZVMG: System 4 Condensers

On NEA's register as of 21 November 2026, Daikin MKM100ZVMG outputs 8.62 kW at 5.90 weighted COP, compared with 7.52 kW and 5.81 weighted COP on MKM85VVMG. Both earn 5 ticks, so simultaneous living-and-bedroom load decides which condenser fits.

On this page

Daikin MKM85VVMG vs MKM100ZVMG: exact NEA register figures

Daikin System 4 quotations in Singapore usually pair iSmileEco+ indoor fan coils with either the MKM85VVMG or the larger MKM100ZVMG outdoor unit (with MKM75ZVMG at 6.07 kW typically serving smaller System 3 setups). Both 85 and 100 models carry 5 NEA ticks.

The figures below come directly from NEA's Registered Goods register snapshot checked on 21 November 2026.

Daikin MKM85VVMG vs MKM100ZVMG: exact NEA register figures summary table
NEA specificationDaikin MKM85VVMGDaikin MKM100ZVMG
NEA tick rating5 ticks (Multi Split)5 ticks (Multi Split)
Rated cooling capacity7.52 kW8.62 kW (+14.6% higher output)
Full-load / weighted COP5.12 / 5.815.25 / 5.90
NEA label annual energy & cost2,809 kWh / S$7583,154 kWh / S$851
Registration expiry on NEA6 Aug 202930 Jan 2028

Why MKM85VVMG suits most 4-room BTO flats cleanly

At 7.52 kW, Daikin MKM85VVMG already sits above several rival base System 4 condensers (such as the 6.93 kW Mitsubishi Electric MXY-4H33VG). For a standard 4-room HDB flat running three bedrooms overnight and an 18,000 BTU living room mostly on weekends, MKM85VVMG balances strong cooling with a lower upfront price.

Its NEA registration runs out to August 2029, confirming it as a current long-lifecycle Singapore residential condenser.

When MKM100ZVMG is the smarter System 4 pick

Choose MKM100ZVMG (8.62 kW) for 5-room HDB flats, Executive Apartments, west-facing condos or open-concept living-dining halls fitted with a 24,000 BTU indoor fan coil. The extra 1.10 kW of rated output keeps every bedroom brisk even when four indoor units run concurrently in afternoon heat.

MKM100ZVMG also posts slightly higher full-load COP (5.25 versus 5.12) and weighted COP (5.90 versus 5.81), so the larger condenser does not sacrifice efficiency per unit of cooling.

Check flat electrical loading before upgrading to MKM100ZVMG

Before specifying MKM100ZVMG in an older resale HDB flat, check whether your unit carries 40A electrical loading rather than an older 30A circuit, and verify ledge clearance for the larger outdoor chassis.

Snowflake Aircon Services verifies Daikin indoor-outdoor combinations, electrical ratings and aircon ledge fit on site before installation so you pay for extra capacity only where room loads demand it.

Common questions

What is the main difference between Daikin MKM85VVMG and MKM100ZVMG?
Both Daikin MKM85VVMG and MKM100ZVMG are 5-tick R32 System 4 multi-split outdoor units on NEA's register as of 21 November 2026. MKM100ZVMG delivers 8.62 kW at 5.90 weighted COP versus 7.52 kW and 5.81 weighted COP on MKM85VVMG, giving stronger peak cooling.
Is Daikin MKM85VVMG big enough for a 4-room HDB System 4?
Daikin MKM85VVMG at 7.52 kW is strong enough for most 4-room HDB flats running three 9,000 BTU bedrooms overnight and an 18,000 BTU living room during daytime or weekends. Step up to MKM100ZVMG mainly when fitting a 24,000 BTU living head or running all four rooms together.
Does Daikin MKM100ZVMG use much more electricity overnight than MKM85VVMG?
When running only one or two bedrooms overnight, MKM100ZVMG scales down via inverter control and carries a slightly higher 5.90 weighted COP than MKM85VVMG's 5.81. Its higher NEA label cost simply reflects testing across a larger 8.62 kW rated capacity.
Where does Daikin MKM75ZVMG fit compared to MKM85VVMG?
Daikin MKM75ZVMG is a smaller 6.07 kW 5-tick multi-split outdoor condenser on NEA's register posting a 6.11 weighted COP, suited mainly to System 3 setups. For four indoor fan coils including a living room, MKM85VVMG or MKM100ZVMG provides safer peak headroom.

Sources