On this page
Coil or a new indoor unit?
Replace the coil when it is still supplied for the model and the unit is fairly new. Replace the whole indoor unit when the coil must be ordered from far away, is no longer made, or the unit is old.
On a wall-mounted unit, a new indoor unit can cost about the same as a coil job, and it renews the fan, board and casing as well. Snowflake Aircon Services' rates for both sit beside the market range.
Scroll to see more columns
| Option | Market range in Singapore | Our rate | When it makes sense |
|---|---|---|---|
| Replace the coil only, indoor or outdoor coil range | $200–$1,800 per job | Quoted per job | The coil is still supplied and the unit is fairly new |
| Replace the whole wall-mounted indoor unit | $280–$450 | The coil is out of supply, or the unit is old | |
| Gas charge after either job, R32 | $120–$200 | Both options need a vacuum and a recharge |
The coil range covers indoor and outdoor coils across unit sizes; a small wall-mounted coil sits low in it. A new indoor unit must be approved for the existing outdoor unit.
Market ranges: published rates from 4 Singapore operators. Checked 18 Nov 2026.
How a coil leak shows
A coil leak is confirmed by testing, not by sight. The test rules out the cheaper joints and pipe sections first.
- Cooling fades over weeks, then returns after a top-up, then fades again.
- Oily marks on the coil fins, which a technician may find when the panel is opened.
- A leak test that finds no fault at the joints or the pipes.
What a new indoor unit needs to match
The replacement indoor unit must be the outdoor unit's brand and appear on that model's approved pairing list. If none is still made, replacing the whole system is the remaining route.
Look at the outdoor unit as well. If it is old, a new indoor unit may soon be followed by a whole new system.
Why a coil leak is worth fixing properly
Topping up gas into a leaking coil buys weeks, not years. Each top-up repeats the cost, and the unit runs short of gas between them.
The fix is a sealed repair, by a new coil or a new indoor unit, followed by a vacuum and a recharge by weight.