Skip to main content

Mitsubishi Heavy Industries vs Fujitsu Aircon in Singapore

Mitsubishi Heavy Industries and Fujitsu share commercial-grade Japanese engineering tailored to demanding Singapore flats. Fujitsu AOAH24CBTA3 edges ahead on System 3 efficiency (6.22 COP, S$576/yr), while MHI SCM80YS-W supplies extra System 4 peak output (8.03 kW) and stronger airflow.

On this page

NEA 5-tick numbers for commercial-grade residential units

Both brands skip flashy marketing gimmicks in favour of stout heat exchangers and high-COP compressors. On the 21 November 2026 NEA register, Fujitsu's System 3 AOAH24CBTA3 achieves 5.44 full-load COP and 6.22 maximum COP at 6.17 kW (S$576/yr), beating MHI's 5.88 kW SCM60YS-W (4.94/6.09 COP, S$593/yr) on both cooling output and yearly energy draw.

Stepping up to four-room flats flips the power lead slightly. MHI's SCM80YS-W delivers 8.03 kW (5.02/5.87 COP, S$812/yr), whereas Fujitsu's AOAH30CBTA4 outputs 7.68 kW at a higher 5.15 full-load COP and a lower S$758 yearly running estimate.

NEA 5-tick numbers for commercial-grade residential units summary table
SpecificationMitsubishi Heavy IndustriesFujitsu General
System 3 flagshipSCM60YS-W: 5.88 kW, COP 4.94/6.09, S$593/yrAOAH24CBTA3: 6.17 kW, COP 5.44/6.22, S$576/yr
System 4 flagshipSCM80YS-W: 8.03 kW, COP 5.02/5.87, S$812/yrAOAH30CBTA4: 7.68 kW, COP 5.15/5.85, S$758/yr
Singapore distributorKM Marketing (authorised MHI distributor)Winfinity Marketing (authorised Fujitsu distributor)
Core focusLong jet air throw, heavy-load coolingCompact indoor chassis, high full-load COP

Distributor support, parts sourcing, and build trade-offs

Because neither brand sells at the mass volume of Daikin or Mitsubishi Electric in Singapore, local distributor responsiveness matters. MHI units are supported locally by KM Marketing, while Fujitsu multi-splits run through Winfinity Marketing; both supply genuine replacement PCBs, thermistors, and fan motors rather than aftermarket copies.

Fujitsu's high full-load COP (5.44 on AOAH24CBTA3, 5.15 on AOAH30CBTA4) pays dividends in households that turn on three or four fancoils simultaneously every evening. MHI's SCM80YS-W shines in west-facing living rooms where raw 8.03 kW capacity and directional jet vanes speed up afternoon pull-down.

Selecting between Mitsubishi Heavy Industries and Fujitsu

Choose Fujitsu AOAH24CBTA3 or AOAH30CBTA4 if you want exceptional multi-room efficiency when several bedrooms run together and appreciate quiet, compact indoor enclosures. Pick MHI SCM80YS-W when maximum simultaneous BTU reserve and deep hall air projection take priority.

Snowflake Aircon Services welcomes your floor plan and current distributor quotes over WhatsApp to assess pipe runs, breaker amperage, and maintenance access ahead of installation day.

Common questions

Why does Fujitsu AOAH24CBTA3 have a notably high 5.44 full-load COP?
Fujitsu pairs generous condenser coil surface area with a tightly matched DC rotary compressor on the AOAH24CBTA3, keeping refrigerant head pressure low even when all three fan coils run simultaneously. That engineering yields 5.44 full-load COP, 6.22 part-load COP, and a S$576 yearly NEA benchmark.
Who handles warranty claims for MHI and Fujitsu aircons in Singapore?
Authorised warranty administration runs through KM Marketing for Mitsubishi Heavy Industries and Winfinity Marketing for Fujitsu multi-split systems. Homeowners should complete online warranty registration immediately after commissioning and retain dealer invoices showing approved installation practices to safeguard five-year compressor coverage.
Are MHI and Fujitsu multi-splits harder to service than mainstream brands?
Routine general servicing, blower wheel washing, and drainage flushing follow standard split-unit procedures on both brands, so experienced Singapore technicians service them smoothly. Only proprietary electronic spares such as replacement inverter PCBs or outdoor fan motors require ordering directly through each distributor.
Which brand handles four rooms running at the same time better?
Mitsubishi Heavy Industries SCM80YS-W delivers 8.03 kW rated output, giving a slight 0.35 kW cooling cushion over Fujitsu's 7.68 kW AOAH30CBTA4 during peak hot afternoons. However, Fujitsu's higher 5.15 full-load COP uses less electricity per kilowatt of cooling delivered across long evening sessions.

Sources