Skip to main content

Panasonic CU-3XU28YBZ vs CU-4XU33YBZ Condensers Compared

Panasonic CU-3XU28YBZ is a 5-tick System 3 condenser rated at 6.55 kW (weighted COP 5.70), while CU-4XU33YBZ adds a fourth port at 6.96 kW (COP 5.61). Both pair with XU nanoe X indoor units for alternating room schedules.

On this page

Side-by-side NEA 5-tick figures for both Panasonic condensers

Panasonic's current Singapore residential R32 multi-split lineup centres on the XU series paired with nanoe X air purification and Comfort Cloud WiFi capability. Checking NEA's air-conditioner listings (21 November 2026) clarifies exactly how much outdoor cooling each condenser supplies.

Like rival System 3 and entry System 4 condensers, moving from three ports to four adds 0.41 kW of rated outdoor output.

Side-by-side NEA 5-tick figures for both Panasonic condensers summary table
Metric (NEA 21 Nov 2026)CU-3XU28YBZ (System 3)CU-4XU33YBZ (System 4)
Maximum indoor headsUp to 3 wall unitsUp to 4 wall units
NEA efficiency tier5 ticks (R32)5 ticks (R32)
Rated cooling output6.55 kW6.96 kW
Full-load / weighted COP4.91 / 5.704.88 / 5.61
Annual NEA label estimate2,529 kWh | S$683/yr2,704 kWh | S$730/yr

How to match each Panasonic condenser to Singapore flat routines

Pick CU-3XU28YBZ for 3-room HDB flats (two bedrooms plus living hall) or 4-room flats that only cool three bedrooms overnight. With 6.55 kW shared across three rooms, even a sunny 18,000 BTU living hall stays brisk when running alongside one bedroom.

Choose CU-4XU33YBZ for standard 4-room BTO flats cooling three bedrooms at night and the living room on weekend afternoons. Because total output caps near 6.96 kW, avoid running all four indoor heads simultaneously on hot afternoons if you expect icy bedroom blasts.

What to do if your 5-room flat needs heavier four-room simultaneous output

Large 5-room HDB flats and west-facing condos that regularly run an 18,000 or 24,000 BTU living hall alongside three bedrooms can outgrow a 6.96 kW condenser quickly. Consider splitting the living room onto a dedicated Panasonic single split (System 3+1) if ledge space allows, or compare 8.0 kW+ 5-tick System 4 condensers from other brands.

Confirm exact indoor CS-XU model codes and WiFi inclusion in writing on your quotation.

Common questions

How much stronger is Panasonic CU-4XU33YBZ compared with CU-3XU28YBZ?
On NEA's 21 November 2026 register, CU-4XU33YBZ supplies 6.96 kW of rated cooling versus 6.55 kW on CU-3XU28YBZ, an increase of 0.41 kW plus a fourth refrigerant port. Efficiency stays nearly identical at 5.61 versus 5.70 weighted COP, both earning 5 ticks.
Can CU-4XU33YBZ handle an 18,000 BTU living room plus three 9,000 BTU bedrooms?
CU-4XU33YBZ supports three 9,000 BTU bedrooms plus one 18,000 BTU living unit cleanly when rooms alternate between daytime living use and nighttime sleeping. Running all four indoor heads simultaneously at 3 pm splits 6.96 kW thinly, slowing cool-down across every room.
Do both CU-3XU28YBZ and CU-4XU33YBZ support Panasonic nanoe X indoor units?
Both CU-3XU28YBZ and CU-4XU33YBZ pair with Singapore Panasonic XU-series indoor wall fan coils featuring nanoe X hydroxyl radical odour and mould reduction. Verify exact indoor CS-XU model suffixes on your written invoice to confirm built-in WiFi and nanoe X generator version.
Which Panasonic condenser should a 3-room HDB BTO flat owner buy?
A 3-room HDB BTO flat with two bedrooms and one living-dining area fits Panasonic CU-3XU28YBZ cleanly without paying for an unused fourth port. It delivers 6.55 kW across three rooms with a 5-tick rating and a S$683 annual NEA label estimate.

Sources