Aircon inverter module repair

We separate an IPM, IGBT or inverter-driver fault from the supply, cooling, wiring, control board and connected compressor or fan before recommending a module or board. We’ll assess first, then confirm whether this is the right scope before you book.

Message us on WhatsApp

BCA-registered10,000+ jobs completed

What inverter-module repair covers

The outdoor inverter power stage may be described as an IPM, IGBT, power transistor, inverter board or compressor-driver module. It controls the power delivered to the compressor or fan. A code can identify that stage without proving which replaceable part has failed. Common situations where an inverter-module check fits:

An IPM, power-module or inverter-board code appears
The exact model and code identify the power stage, board, module, fan driver or compressor driver that needs testing.
The outdoor unit starts, trips or stops under load
A weak power stage can fail as demand rises, but the supply, cooling and connected compressor or fan can create the same protection.
Several rooms lose cooling together
On a multi-split or VRF system, one shared outdoor inverter-stage fault can stop the connected indoor units.

When inverter-module replacement isn't suitable

An inverter-related code names the circuit that reported the fault. It does not prove that a separate IPM can or should be replaced.

The supply, connector or harness is faulty
Voltage imbalance, loose terminals, damaged wiring or a failed inter-board link can interrupt a healthy inverter stage.
Cooling or temperature feedback is wrong
A blocked heat sink, failed fan or temperature-sensor circuit can make the module protect itself without an internal power-stage failure.
The compressor or fan is drawing abnormal current
A locked or electrically damaged load can trigger a healthy module's overcurrent protection.

What you get

A clear power-stage diagnosis before a module, driver board, outdoor PCB or compressor is approved.

The exact inverter stage is identified
We match the model and code to the IPM, IGBT, inverter board, fan driver or compressor-driver circuit.
The module and surrounding circuit are separated
Supply, cooling, connectors, current feedback, control signal and connected load are checked together.
The repair and part decision is explained
You receive the confirmed failed stage, correct model-specific assembly, availability and quote before work starts.

What we check before repair

Inverter-module diagnosis covers the complete power path rather than treating every IPM or inverter code as a failed module.

Model, code and board identity
We confirm whether the source names an IPM, IGBT, inverter board, fan driver or compressor-driver stage on the exact model.
Supply, connectors and harnesses
Input voltage, terminals, fuses, inter-board communication and wiring are checked for interruption or damage.
Cooling and feedback
Heat-sink condition, fan operation, temperature sensing and current feedback are checked before calling the power stage faulty.
Compressor or fan load
The connected load is checked for lock, overcurrent or electrical damage that could trigger a healthy module's protection.

The main PCB, driver board, IPM or IGBT, current feedback, fan, compressor and supply are separated before a part is selected. Tell us whether the outdoor unit starts, trips or stays off. How a job runs, from first message to booking.

Choose the right component scope

Use the general page when the faulty unit is unclear. Choose an indoor, outdoor or driver page when the code or inspection identifies that stage.

Brand-specific inverter module repair

Each brand page lists the models we see, that brand’s fault codes, parts lead times and when replacement makes more sense.

Workmanship warranty

We stand behind the repair we carry out, and we are straight about the part of the cover we do not set ourselves.

Labour

30-day workmanship warranty. If the same fault returns from our repair, we come back and the labour is on us, with no second diagnostic visit fee.

Parts

Parts carry the distributor's warranty for that component, so the term varies by part. We tell you both terms before you approve the work.

Frequently asked questions about aircon inverter module repair in Singapore

What are the signs of an aircon inverter-module problem?

Common signs include an IPM, power-module or inverter-board code, an outdoor unit that starts then trips, repeated protection or several rooms losing cooling together. Supply, wiring, cooling, sensors, the control board and connected load can create the same symptoms.

Does an IPM or inverter code prove the module has failed?

No. The code identifies the power stage or its protection path. Supply, connectors, cooling, feedback, the wider PCB and the connected compressor or fan must be tested separately.

Can the inverter module be replaced by itself?

It depends on the model. Some systems use a replaceable module or driver board, while others integrate the power stage into a complete outdoor PCB assembly. We confirm the board revision and supported repair before ordering.

Should I repair or replace the aircon?

A contained inverter-stage repair can make sense when the exact failed assembly is confirmed and available. On an older system with compressor damage, repeated board faults or several major issues, compare the complete repair with replacement.

We cover all of Singapore. Find aircon services in your area.

Describe your situation

Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.

WhatsApp us