LG Multi V 5 commercial VRF aircon 201C + HR unit number
Use this LG Multi V 5 commercial VRF 201C + HR unit number error code guide to decide when to stop resetting, what to capture, and what to check before parts are quoted.
What does LG 201C + HR unit number mean?
LG Multi V 5 commercial VRF 201C + HR unit number is listed as heat-recovery unit: Heat-recovery-unit liquid-pipe sensor error in VRF, Cassette, Ducted rows such as LG Multi V 5 commercial VRF. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Open, shorted, displaced, or out-of-range thermistor or pressure-sensor reading.
Loose sensor connector, damaged sensor harness, or water-affected wiring.
PCB input fault after the sensor and wiring readings are confirmed.
What to do now
Use these steps before another reset, sensor check, or PCB quote.
Treat it as a fault signal
If 201C + HR unit number returns or cooling is still abnormal, stop treating it as a simple reset issue.
Reset 201C + HR unit number once
Capture the 201C + HR unit number display first, then power-cycle once only and note whether the same fault returns.
Send these to us
201C + HR unit number error code, a clear display photo, LG Multi V 5 commercial VRF model stickers, affected rooms, reset result, and when the fault appears
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Source repair action | Record 201C + HR unit number and confirm that the heat-recovery unit reported it. Have an authorised LG VRF technician check the named sensor, connector, harness, and service-manual readings before replacing a board. |
| Singapore / model note | LG Singapore lists Multi V 5, but the installed unit nameplate and matching service manual control. Do not apply this row to Multi V i or another LG family. |
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before resetting 201C + HR unit number, take a clear display photo. | Confirm which sensor 201C + HR unit number maps to on the exact model table. |
| Capture the LG Multi V 5 commercial VRF indoor and outdoor model stickers so the correct family row is used. | Measure the sensor value against the service-manual resistance or voltage range. |
| Note whether one room, several rooms, or the whole system is affected, plus whether it returns after one reset. | Check connector condition, harness continuity, and PCB input before replacing boards. |
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows 201C + HR unit number. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same 201C + HR unit number fault. | The shared outdoor side, power path, communication trunk, or refrigerant circuit needs priority checking. |
| The fault appears immediately even before the unit cools properly. | Sensor value, connector, harness, and PCB input should be tested in that order. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to VRF, Cassette, Ducted rows such as LG Multi V 5 commercial VRF. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
Sensor or PCB decision
LG Multi V 5 commercial VRF 201C + HR unit number is usually repair-first if a sensor or harness reading is confirmed. Board replacement should wait until the sensor circuit is tested.
Sensor replacement is usually targeted when resistance or voltage readings are out of range.
Harness or connector damage can look like a sensor fault until continuity is checked.
PCB replacement is a later step if the sensor and wiring test correctly.
LG 201C + HR unit number questions
What does the LG 201C + HR unit number error mean?
Can I fix a LG 201C + HR unit number error myself?
Is it safe to keep running the aircon with a 201C + HR unit number error?
What causes a LG 201C + HR unit number error?
Will a LG 201C + HR unit number error need a repair or a full replacement?
What should I send a technician about a LG 201C + HR unit number error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full LG list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.