Mitsubishi Electric aircon 24 / LED1 lit, LED2 11x blinking light
Use this Mitsubishi Electric 24 / LED1 lit, LED2 11x blinking light guide to decide when to stop resetting, what to capture, and what to check before parts are quoted.
What does Mitsubishi Electric 24 / LED1 lit, LED2 11x mean?
Mitsubishi Electric 24 / LED1 lit, LED2 11x is listed as communication between P.C. boards protection in Multi-Split rows such as FP Series, Starmex R32. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Loose, corroded, crossed, or damaged indoor-outdoor signal wiring.
Terminal block, connector, or junction fault on the indoor or outdoor side.
Indoor or outdoor PCB communication circuit fault after wiring is proven sound.
What to do now
Use these steps before another reset, signal-wire check, or PCB quote.
Stop using the unit if 24 / LED1 lit, LED2 11x returns
If 24 / LED1 lit, LED2 11x returns after one reset, stop repeated restarts and get the matching source row diagnosed.
Reset 24 / LED1 lit, LED2 11x once
Capture the 24 / LED1 lit, LED2 11x pattern first, then power-cycle once only and note whether the same fault returns.
Send these to us
24 / LED1 lit, LED2 11x blinking light, a short video of the blinking-light sequence, Mitsubishi Electric model stickers, affected rooms, reset result, and whether one room or every room failed
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Source repair action | Do not keep resetting the system if this pattern returns. Record the model number, lamp or LED pattern, and affected rooms before booking diagnosis. |
| Singapore / model note | Official Mitsubishi Electric checklist action: Check the connecting wire between outdoor control P.C. board and outdoor power P.C. board. |
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before resetting 24 / LED1 lit, LED2 11x, take a short video of the blinking-light sequence. | Match 24 / LED1 lit, LED2 11x against the exact model-family source row before quoting parts. |
| Capture the Mitsubishi Electric indoor and outdoor model stickers so the correct family row is used. | Test communication terminals, cable continuity, polarity, and outdoor power. |
| Note whether one room, several rooms, or the whole system is affected, plus whether it returns after one reset. | Read indoor and outdoor PCB indicators only after the signal path is proven sound. |
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows 24 / LED1 lit, LED2 11x. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same 24 / LED1 lit, LED2 11x fault. | The shared outdoor side, power path, communication trunk, or refrigerant circuit needs priority checking. |
| The fault returns immediately after one reset. | Start with the source-row diagnostic branch before approving parts. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to Multi-Split rows such as FP Series, Starmex R32. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
Wiring or PCB decision
Mitsubishi Electric 24 / LED1 lit, LED2 11x should start with terminal, signal-cable, and power checks. PCB replacement only makes sense after the communication path is proven sound.
A loose terminal or bad junction is a targeted repair once the path is confirmed.
Signal-wire replacement depends mostly on access through trunking, ceiling, or concealed routes.
PCB cost should be weighed against age only after wiring and power checks pass.
Mitsubishi Electric 24 / LED1 lit, LED2 11x questions
What does the Mitsubishi Electric 24 / LED1 lit, LED2 11x error mean?
Can I fix a Mitsubishi Electric 24 / LED1 lit, LED2 11x error myself?
Is it safe to keep running the aircon with a 24 / LED1 lit, LED2 11x error?
What causes a Mitsubishi Electric 24 / LED1 lit, LED2 11x error?
Will a Mitsubishi Electric 24 / LED1 lit, LED2 11x error need a repair or a full replacement?
What should I send a technician about a Mitsubishi Electric 24 / LED1 lit, LED2 11x error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Mitsubishi Electric list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.