Mitsubishi Electric aircon FR11 / recall upper lamp 11x
Use this Mitsubishi Electric FR11 / recall upper lamp 11x guide to decide when to stop resetting, what to capture, and what to check before parts are quoted.
What does Mitsubishi Electric FR11 / recall upper lamp 11x mean?
Mitsubishi Electric FR11 / recall upper lamp 11x is listed as indoor fan motor feedback signal missing in Inverter Split, Multi-Split rows such as FN Series, MSXY-FN. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Fan motor locked, slow, not rotating, or outside the expected feedback range.
Fan blade obstruction, worn motor, weak capacitor, or damaged motor harness.
Indoor or outdoor PCB drive fault after the motor and wiring are tested.
What to do now
Use these steps before another reset or parts quote.
Stop using the unit if FR11 / recall upper lamp 11x returns
If FR11 / recall upper lamp 11x returns after one reset, stop repeated restarts and get the matching source row diagnosed.
Reset FR11 / recall upper lamp 11x once
Capture the FR11 / recall upper lamp 11x pattern first, then power-cycle once only and note whether the same fault returns.
Send these to us
FR11 / recall upper lamp 11x blinking light, a short video of the blinking-light sequence, Mitsubishi Electric model stickers, affected rooms, reset result, and fan noise or no-airflow symptoms
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Source repair action | Do not keep resetting the system if this pattern returns. Record the model number, lamp or LED pattern, and affected rooms before booking diagnosis. |
| Singapore / model note | Official Mitsubishi Electric checklist action: Check indoor fan motor feedback, connector, and indoor control board. |
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before resetting FR11 / recall upper lamp 11x, take a short video of the blinking-light sequence. | Confirm whether FR11 / recall upper lamp 11x points to the indoor fan, outdoor fan, or drive circuit. |
| Capture the Mitsubishi Electric indoor and outdoor model stickers so the correct family row is used. | Check for blade obstruction, motor winding, feedback signal, and connector condition. |
| Note whether one room, several rooms, or the whole system is affected, plus whether it returns after one reset. | Confirm PCB fan-drive output before quoting a motor or board. |
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows FR11 / recall upper lamp 11x. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same FR11 / recall upper lamp 11x fault. | The shared outdoor side, power path, communication trunk, or refrigerant circuit needs priority checking. |
| The fan starts slowly, stops, or makes abnormal noise. | Motor feedback, blade obstruction, and board output need to be separated. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to Inverter Split, Multi-Split rows such as FN Series, MSXY-FN. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
Motor or board decision
Mitsubishi Electric FR11 / recall upper lamp 11x is repair-first when the motor, blade, or feedback circuit is confirmed. Replacement becomes relevant only if motor or board cost is poor value for the system age.
Obstruction or loose connectors are simpler than a failed motor or board output.
Motor replacement depends on whether feedback and winding tests confirm failure.
Board replacement should follow motor and harness checks, not replace them.
Mitsubishi Electric FR11 / recall upper lamp 11x questions
What does the Mitsubishi Electric FR11 / recall upper lamp 11x error mean?
Can I fix a Mitsubishi Electric FR11 / recall upper lamp 11x error myself?
Is it safe to keep running the aircon with a FR11 / recall upper lamp 11x error?
What causes a Mitsubishi Electric FR11 / recall upper lamp 11x error?
Will a Mitsubishi Electric FR11 / recall upper lamp 11x error need a repair or a full replacement?
What should I send a technician about a Mitsubishi Electric FR11 / recall upper lamp 11x error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Mitsubishi Electric list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.