On this page
Why cooking grease and incense soot clog coils twice as fast
Dry bedroom lint lifts cleanly off nylon aircon mesh under plain tap water. Aerosolised wok oil and fragrant joss-stick soot behave completely differently: microscopic warm droplets float straight through plastic screens and condense on the freezing aluminium evaporator fins.
Once that sticky layer forms, ordinary house dust glues itself onto the coil and blower drum until airflow collapses and yellow-brown oil drips into the condensate pan.
| Household habit | Effect on living-room fan coil | Smart prevention habit |
|---|---|---|
| Heavy stir-frying with open kitchen & hall aircon on | Draws oil mist straight across room into top return intake | Switch hall aircon off during frying; run hood + open service-yard window |
| Daily altar incense burning below or near wall unit | Coats white casing yellow and packs resin soot onto blower blades | Keep altar well away from intake and crack nearby window briefly |
| Weekly dish-soap filter wash skipped | Greasy film seals nylon weave shut, straining fan motor | Wash hall mesh filters every 2 weeks with mild diluted dish soap |
| Waiting 12 months between washes | Plain water servicing fails; full chemical degreasing overhaul needed | Service greasy open-kitchen hall units every 2 to 3 months |
Simple ventilation rules for open-concept BTO kitchens
If you hacked the kitchen wall during your BTO renovation, switch the living-room aircon off five minutes before heating oil, turn the cooker hood to high speed (or open the service-yard and kitchen windows for cross-breeze), and wait ten minutes after cooking finishes before restarting cooling.
Adding a slim sliding glass partition between kitchen and dining cuts airborne oil travel into the living-room fan coil by a wide margin.
When plain general servicing is no longer enough
Plain water jets slide right off congealed cooking oil and incense resin. Once living-room airflow weakens, fins look glossy brown or stale fried-food odours blow out every evening, schedule a proper degreasing chemical wash or full dismantled overhaul so fins and blower blades are rinsed completely clean.
Never spray harsh oven cleaners or caustic kitchen degreasers onto delicate aluminium coils yourself, as strong alkalis corrode fin metal permanently.