On this page
Three ways co-living flats split aircon electricity fairly
Because most Singapore HDB flats and condos run three or four bedrooms off one shared outdoor condenser wired to a single SP Group meter, measuring one room's exact share of compressor electricity is technically impossible with a simple plug-in wall meter.
Agreeing on a transparent written billing formula before move-in avoids monthly tension between remote workers running aircon all day and office commuters.
| Billing arrangement | How it works in Singapore co-living | Strength & watch-out |
|---|---|---|
| Capped utilities allowance + equal overage split | Rent includes fixed monthly SP cap; excess split equally by headcount | Simple and standard; define exact cap and monthly bill sharing clearly |
| Tiered room rate (master / WFH vs standard) | Master bedrooms or daytime WFH tenants pay slightly higher utility share | Feels fairer when usage hours diverge sharply across housemates |
| Individual single-split sub-meters | Only feasible where each room has its own dedicated condenser circuit | Exact kWh tracking, though rare outside custom-built co-living units |
Why one coordinated servicing schedule beats per-tenant bookings
When four room tenants hire four different contractors on four different dates, one room invariably skips servicing for nine months until its clogged drain pan leaks onto the flooring or its choked coil strains the shared outdoor condenser for everyone.
Smart co-living operators book one ACRA-registered contractor every three months for all rooms on a single invoice, splitting the modest per-unit cost cleanly and archiving one complete receipt trail for the landlord.
Handling shared condenser faults and tenant move-outs cleanly
Spell out in each room tenancy agreement that indoor filter cleanliness and room-level misuse sit with the room occupant, whereas shared outdoor condenser or compressor repairs sit with the landlord or master operator provided quarterly whole-flat servicing stayed current.
Check every departing tenant's fan coil condition and cooling strength during room handover before releasing their deposit.