On this page
Capacity class gap and NEA 5-tick comparison
Although installers often quote Daikin MKM85VVMG and Panasonic CU-4XU33YBZ side by side for 4-room HDB flats, November 2026 NEA records show they occupy slightly different output tiers. Daikin produces 7.52 kW at 5.12 full-load COP and 5.81 weighted COP (2,809 kWh, S$758 yearly).
Panasonic CU-4XU33YBZ sits at 6.96 kW with 4.88 full-load COP and 5.61 weighted COP, producing a S$730 annual label estimate simply because NEA tests smaller-capacity condensers at lower total kWh loads. Per kilowatt of cooling delivered, Daikin operates more efficiently across both full and partial loads.
| Specification (NEA Nov 2026) | Daikin MKM85VVMG | Panasonic CU-4XU33YBZ |
|---|---|---|
| Rated cooling capacity | 7.52 kW (approx. 25,660 BTU/h) | 6.96 kW (approx. 23,750 BTU/h) |
| Full-load / weighted COP | 5.12 / 5.81 | 4.88 / 5.61 |
| NEA annual energy cost | S$758/yr (2,809 kWh) | S$730/yr |
| Indoor air-care option | Streamer discharge on compatible models | Built-in nanoe X generator on XU wall units |
| Recommended Singapore fit | Sun-facing 4-room or compact 5-room flats | Shaded 4-room flats with night-heavy bedroom use |
Afternoon living-room load versus bedroom-only habits
That extra 0.56 kW (roughly 1,900 BTU/h) on Daikin MKM85VVMG matters noticeably when west-facing glass heats an open living and dining hall while a study room runs simultaneously. Panasonic buyers wanting similar headroom can look up to CU-4XU38YBZ (7.93 kW) instead.
For households that rarely cool the living room and mostly switch on two bedrooms after 9 pm, Panasonic CU-4XU33YBZ stays comfortably sized while offering built-in nanoe X odour suppression and Comfort Cloud scheduling.
Humidity control and long-term servicing considerations
Both Daikin Streamer and Panasonic nanoe X assist with fresher indoor air, yet neither feature stops wet coil fouling or blocked PVC drain pipes in Singapore's year-round humidity. Oversized or neglected indoor blowers still accumulate slime and drip down bedroom walls.
When choosing between the two, check local technician access to your ledge and keep regular chemical maintenance on schedule so coils exchange heat cleanly without straining the compressor or PCB.