On this page
How much does aircon installation cost for an HDB flat?
Supply-and-install prices climb with system size, and the flat type sets the usual size. Snowflake publishes fixed package prices for 9,000 BTU sets and quotes other systems after a site survey.
HDB lists a 3-room flat as two bedrooms with a living area. A 4-room or 5-room flat has three bedrooms with a living area, and a 5-room adds a study.
Scroll to see more columns
| System | Market range in Singapore | Our rate | Usual fit |
|---|---|---|---|
| System 2 | $2,000–$3,270 per job | $2,600 | Two bedrooms in a 3-room flat |
| System 3 | $2,800–$4,400 per job | $3,750 | A 3-room flat with the living room, or three bedrooms in a 4-room flat |
| System 4 | $3,380–$5,450 per job | $4,700 | A 4-room flat with the living room, or a 5-room flat |
| Installation only, units supplied by you | Published installation-only prices checked on 18 November 2026 cover different work, from fitting alone to piping and materials included, so they do not form one range; pipe length, trunking and old-unit removal set it. | Any flat | |
| Site survey before the quote | $30 / visit | Any flat |
Market ranges are supply-and-install packages for inverter systems, mostly Mitsubishi Electric and Mitsubishi Heavy Industries sets. Snowflake's rate is its Mitsubishi Electric Starmex package with 9,000 BTU indoor units: one trip, piping up to 50 ft per unit, disposal of the old system, vacuum, testing and commissioning. A Daikin package is also on the rate card.
Market ranges: published rates from 5 Singapore operators. Checked 18 Nov 2026.
Which system the flat needs
Count the rooms in use at the same time on a typical night, not the rooms on the floor plan. A study used twice a week rarely justifies a fourth head.
Whether a fourth head pays off is covered in the System 3 or System 4 guide. The BTU sizing guide sets the size of each indoor unit.
What moves an HDB quote
Two quotes for the same system can differ by the work around the units. Ask for each line in writing.
Snowflake Aircon Services installs Starmex by default, for reliability, ease of service and parts availability. Another brand is fitted on request.
- Brand, the indoor sizes and the tick rating.
- New piping, or reusing the old pipes, and the length of each run.
- Trunking, a new condenser bracket and electrical work.
- Removal and disposal of the old units.
Rules every HDB installation must meet
BCA allows only trained, registered installers to fit an outdoor unit outside the building. A stainless steel bracket, or a concrete ledge designed for it, must carry the unit.
The installer must submit an installation report to BCA within 14 days of completion. Ask for the installer's BCA registration before work starts.
Flat by flat
Pipe routes, the ledge and the power supply differ from flat to flat. Snowflake Aircon Services prices other systems after a site survey and waives the survey fee if the installation goes ahead.