On this page
How much does a condo aircon installation cost?
Base packages climb with each added indoor unit, with no condo premium. The extra cost sits in concealed piping, ceiling work and the management office's terms.
Snowflake's own Starmex and Daikin sets carry fixed prices, shown beside the market ranges; concealed piping and ceiling work are quoted after a survey.
| System | Market range in Singapore | Our rate |
|---|---|---|
| System 2 | $2,000–$3,270 per job | $2,600 |
| System 3 | $2,800–$4,400 per job | $3,750 |
| System 4 | $3,500–$5,450 per job | $4,700 |
| Extra piping beyond the included length | $18–$60 per metre | |
| Concealed piping or false-ceiling work | Two sources price it, one per wall section and one per metre, which cannot be combined into one range; the ceiling, the pipe route and who makes good the finishes set it. | |
| Management office deposit or fees | Each management corporation sets its own, under its by-laws. |
Market ranges are published base packages from three operators; several are starting prices. The Snowflake rate shown is the Starmex set with 9,000 BTU heads, covering one trip, up to 50 ft of piping a head, old-system disposal, vacuuming and commissioning; Daikin sets are priced too.
Market ranges: published rates from 3 Singapore operators. Checked 18 Nov 2026.
Does a condo aircon installation need MCST approval?
Often, yes. BCA's strata guide says a management corporation may make by-laws requiring owners to get its approval before carrying out works in their unit.
Works that affect the building's appearance, such as a condenser on the façade, need the corporation's authorisation, and may have to follow its design guidelines.
Approval checklist
Collect these before the installer is booked. The condo installation checklist covers work hours and lift booking.
- The works application form from the management office.
- The by-laws on condenser position and visible piping.
- Any deposit, and how it is returned.
The order of a condo installation
Each step waits on the one before it. Building the timeline in this order avoids a wasted installation day.
| Step | What happens | Who decides the timing |
|---|---|---|
| 1. Site survey | Pipe routes, condenser position and power are checked | You and the installer |
| 2. Application | The works form and by-law checks go to the management office | The management corporation |
| 3. Approval | Written approval, and any deposit is paid | The management corporation |
| 4. Installation | Units fitted within the permitted hours | The installer, within the house rules |
| 5. Report | The installer submits the BCA installation report within 14 days | Set by BCA rules |
Façade rules from BCA
A condenser on the façade must be fitted by a BCA-trained, registered installer. It must rest on a stainless steel bracket, or on a concrete ledge made for the purpose.
Snowflake Aircon Services surveys the site first. The survey fee is waived when the installation goes ahead.