On this page
What decides aircon installation cost in a landed home?
System count decides most of it, then pipe length past the allowance, then access to each outdoor unit. A multi-split joins a fixed number of rooms to one outdoor unit, so extra rooms beyond that mean a second system.
Daikin Singapore's MKM multi-split range has three to five connection ports per outdoor unit. A house that wants every room on one system is the case covered in daikin vrv or multi-split.
| Item | Market range in Singapore | Our rate |
|---|---|---|
| Two rooms on one outdoor unit, Starmex (9,000 + 9,000 BTU) | $2,600 | |
| Three rooms on one outdoor unit, Starmex (3 x 9,000 BTU) | $3,750 | |
| Four rooms on one outdoor unit, Starmex (4 x 9,000 BTU) | $4,700 | |
| Two rooms on one outdoor unit, Daikin (9,000 + 9,000 BTU) | $2,800 | |
| Three rooms on one outdoor unit, Daikin (3 x 9,000 BTU) | $4,050 | |
| Four rooms on one outdoor unit, Daikin (4 x 9,000 BTU) | $4,950 | |
| Extra copper piping past the included length | $25–$60 per metre | |
| Piping concealed in walls or false ceilings | Only one operator checked prices it, per wall section; the route, the hacking and who reinstates the finishes set it. | |
| Work at height on an upper storey | Only one operator checked publishes a work-at-height charge; scaffold or lifting access and the façade set it. | |
| Second trip, when piping goes in before the units | $150 / trip | |
| Stainless steel bracket for an outdoor unit | $200 / unit | |
| Site survey before the quote | $30 / visit |
Snowflake packages include one trip and up to 50 ft of piping per indoor unit. Other published allowances run from 3 to 15 metres per unit, so compare the included length before the rate.
Market ranges: published rates from 4 Singapore operators. Checked 21 Nov 2026.
Where the outdoor units can go
Under BCA rules, an outdoor unit fixed outside the building must sit on stainless steel brackets, or on a concrete ledge designed to carry it. Only trained installers may fit it, and the installation report is due within 14 days.
Height matters as much as position. Daikin's installer guide for its R32 2MXM to 5MXM multi-splits, a European range, allows 15 m between the outdoor unit and the rooms when it sits above them, and 7.5 m between indoor units on different levels. One system serving several storeys has to fit both limits.
A roof condenser serving the ground floor counts the house's full height against that limit. Singapore models carry their own figures, so ask for the outdoor model's manual; the maximum height difference guide explains why the direction matters.
Piping routes between floors
The same guide caps the pipe to each room at 25 m and the total at 50 to 75 m, depending on the outdoor model. A condenser placed far from the rooms on the floor above can use up that budget.
Every metre past the package allowance is charged, so the route matters before the brand does. Pipes run hidden inside walls and ceilings or sit in trunking on the surface, and reaching concealed piping later is a trade worth weighing now.
When to plan it in a rebuild or extension
Agree the pipe routes at the layout-drawing stage, before walls are plastered and false ceilings are boarded. Where piping and drainage go in before the renovation is finished, the units follow on a second trip, which the rate card prices as a trip surcharge.
A house weighing several systems against one per room can start with single splits or a multi-split.