On this page
MXY-4H33VG vs MXY-4H38VG: exact NEA register comparison
Both MXY-4H33VG (along with its updated MXY-4H33VG2 registration) and MXY-4H38VG are 5-tick R32 System 4 outdoor condensers for Mitsubishi Electric Starmex multi-splits in Singapore. Many HDB quotes default to the smaller 4H33VG to keep headline prices low without explaining the 16% capacity difference.
All figures below come straight from NEA's Registered Goods Product Search snapshot checked on 21 November 2026.
| NEA specification | MXY-4H33VG (and 4H33VG2) | MXY-4H38VG |
|---|---|---|
| NEA tick rating | 5 ticks (Multi Split) | 5 ticks (Multi Split) |
| Rated cooling capacity | 6.93 kW (VG2: 6.88 kW) | 8.05 kW (+16% higher capacity) |
| Full-load / weighted COP | 4.86 / 5.76 (VG2: 4.89 / 5.95) | 4.97 / 6.19 (higher efficiency ratio) |
| NEA label annual energy & cost | 2,646 kWh / S$714 (VG2: 2,570 kWh / S$694) | 2,926 kWh / S$790 |
| Registration expiry on NEA | 27 Mar 2028 (VG2: 26 Dec 2028) | 6 Mar 2028 |
When MXY-4H33VG is plenty for a 4-room HDB flat
If your household runs two or three 9,000 BTU bedrooms overnight and switches the 18,000 BTU living-room unit on only during weekends when bedrooms are empty, 6.93 kW covers that staggered load comfortably.
Notice also that the newer MXY-4H33VG2 revision edges weighted COP up from 5.76 to 5.95 while trimming NEA label annual consumption to 2,570 kWh, making it an efficient match for standard 4-room HDB layouts.
When paying extra for MXY-4H38VG pays off
Step up to the 8.05 kW MXY-4H38VG whenever you fit a 24,000 BTU indoor unit in an open-concept living room, have west-facing afternoon sun across multiple rooms, or run three bedrooms plus the living area at the same time on weekends and holidays.
Despite delivering 1.12 kW more peak cooling, MXY-4H38VG actually posts a higher weighted COP (6.19 versus 5.76 on 4H33VG), meaning it handles part-load cruising efficiently without straining the compressor.
Check physical dimensions and electrical supply before ordering
Verify your HDB aircon ledge clearance and electrical circuit rating before upgrading to the larger 8.05 kW condenser, especially in older resale flats with 30A electrical loading. Always match exact indoor unit combinations against Mitsubishi Electric Singapore's published table.
Snowflake Aircon Services sizes MXY-4H33VG and MXY-4H38VG installations against real simultaneous room usage rather than pushing the cheaper 4H33VG onto heavy family loads.
Common questions
Is MXY-4H38VG worth the upgrade over MXY-4H33VG for a 4-room HDB flat?
Why does MXY-4H38VG show a higher NEA annual cost if its COP is higher?
What is the difference between MXY-4H33VG and MXY-4H33VG2?
Can MXY-4H33VG handle a 24,000 BTU living room unit plus three bedrooms?
Sources
Sources checked .