On this page
What a relocated aircon needs
Before removal, the refrigerant is pumped back into the outdoor unit so none escapes. At the new place, the flares are remade, the piping is vacuumed and the charge is checked before the unit runs.
Mitsubishi Electric's installation manual sets out the same steps: pump down when relocating, remake flares, then vacuum before charging.
| Job | Our rate |
|---|---|
| Relocate a unit within the same home | $300–$450 / unit |
| Relocation to a new address | Quoted per job |
| Gas after a leak is found and sealed, R32 | $120–$200 |
| Gas after a leak is found and sealed, R410A | $80–$150 |
A relocation to a new address is quoted after a site check. If the charge is short after reinstallation, gas has leaked, and the leak is found and sealed before any gas is added.
Reinstallation checklist
Ask the relocation company which of these it does, in writing.
- Refrigerant pumped back before the pipes were cut.
- Units capped and moved upright, without knocks to the coils.
- New piping where the old run cannot be reused at the new place.
- Flares remade, not reused.
- Piping vacuumed before the gas is released.
- Charge checked; extra gas only for a pipe run longer than the manual's pre-charged length, never to cover a leak.
- Every unit run and checked for cooling and drainage.
Why a moved aircon sometimes leaks
Most leaks after a move are at the joints. A flare reused instead of remade, or a joint not pressure checked, can lose gas within weeks.
If cooling fades soon after a move, ask the relocation company to check its joints before paying anyone for a top-up.
What a move does to the warranty
Warranty terms differ on moves. Daikin Singapore ends cover once a unit goes to another premises; MHI's terms list relocation as an exclusion; LG's exclude faults arising from dismantling or relocation.
Ask the relocation company which brand terms apply, and keep its invoice on file.