Skip to main content

Replacing One Indoor Unit When Its Model Is Discontinued

On a multi-split, one room's indoor unit cannot be swapped for any model you like. It has to suit the outdoor unit that drives the other rooms, and once the original model is discontinued that narrows the choice fast.

On this page

Can one indoor unit be replaced on its own?

Yes, if the outdoor unit's maker still lists an indoor model that pairs with it. Newer indoor units in the same brand sometimes pair with an older outdoor unit; the maker's combination table says which.

If none pairs, there are two ways left. Repair the old indoor unit if its failed part can still be found, or replace the system.

One failed indoor unit on a multi-split: the options

Scroll to see more columns

OptionMarket range in SingaporeOur rateWhen it works
New compatible wall-mounted indoor unit$280–$450The outdoor unit's maker still lists a compatible indoor model
Repair the old indoor unit instead$30 / visitA single part failed and is still supplied, or a reconditioned part fits
Replace the whole system, System 3$1,800–$7,000 per job$3,750No compatible indoor unit is sold, or the outdoor unit is also old
Replace the whole system, Daikin package$4,050The same, if Daikin is chosen

Whether a newer indoor model pairs with an older outdoor unit is set by the maker's combination table, not by the brand name alone.

Market ranges: published rates from 4 Singapore operators. Checked 20 Nov 2026.

Our rates are from our rate card.

How to check compatibility

A technician can do this from the two model stickers before anyone visits.

  • Read the outdoor unit's model from its plate.
  • Look the outdoor model up in its maker's latest pairing table.
  • Check the refrigerant matches, for example R410A or R32.
  • Check the new indoor unit's capacity fits within the outdoor unit's total.

When a new system is the better buy

On an ageing outdoor unit, a new indoor unit ties a new part to an old one. When the outdoor unit fails later, the new indoor unit may not pair with its replacement.

An ageing R410A system with one failed room, or any R22 system, is often the moment to price a whole new system. For a new system, Snowflake's standard brand is Mitsubishi Electric Starmex, and Daikin is quoted too.

The interim fix

If the fault is inside that one indoor unit, the other rooms usually keep cooling while it is switched off. A gas leak or a communication fault on the shared circuit can stop every room, so a diagnosis comes first.

Common questions

Can I replace one indoor unit on a System 3 aircon?
Yes, if the outdoor unit's maker still lists a compatible indoor model. A System 3 indoor unit has to match the outdoor unit's brand, refrigerant and capacity, and appear on its maker's list for that outdoor model. If none is sold, the options are a repair or a new system.
What if my multi-split indoor unit model is discontinued?
Check whether a newer indoor model from the same brand is listed as compatible with your outdoor unit; makers sometimes list newer models for older outdoor units. If none is listed, repair the old indoor unit if its failed part can still be found, or price a new system.
Can I use a different brand's indoor unit on my multi-split?
No. A multi-split indoor unit must come from the outdoor unit's maker and appear in its approved list. Daikin's warranty terms, for example, exclude equipment connected to another make or brand. Units from different brands do not work together on one refrigerant circuit.
How long can one room go without its multi-split indoor unit?
As long as needed, if the fault is inside that one indoor unit: it is switched off while the other rooms keep cooling, which gives time to price the options. If the fault is in the shared gas circuit or the outdoor unit, every room is affected and the repair cannot wait.

Sources