Aircon General Servicing
General servicing is the standard maintenance clean for an aircon that's working normally. We clean filters, coil, drain pan, and blower to clear routine buildup before it compounds into a fault. If the buildup's already past rinse range, we'll say so and flag the right next step before quoting. For current rates, see the pricing page.
Not Sure If This Fits?
Tell us the symptom, unit type, and what changed recently. We'll assess and advise whether this is the right next step.
What General Servicing Covers
A routine maintenance clean for a unit working normally. Common situations where general servicing fits:
Unit is due based on usage
Every 3 to 4 months for heavy daily use, 4 to 6 for moderate use, 6 for light use.
Cooling is mostly normal
The unit works, but airflow feels weaker, output's dusty, or filters haven't been cleaned recently.
You want regular upkeep across multiple units
A standard service keeps the system clean and flags visible issues before they turn into faults.
When to Start Elsewhere
A standard clean won't solve every complaint. These cases should be routed differently.
Smell or weak airflow returns after recent servicing
Buildup's deeper than a rinse can clear. Chemical servicing fits better.
Unit powers on but doesn't cool
Likely a refrigerant, airflow, or compressor fault. Start with diagnosis.
Error code or blinking light
Points to a sensor, board, or control issue, not a cleaning issue.
What We Check During The Visit
General servicing clears the four routine buildup areas and includes a basic condition check.
Filter wash
We pull the filters, rinse them clear of dust and debris, dry them, and refit.
Evaporator coil rinse
We flush the coil fins with water to clear surface grime and restore heat exchange. No chemicals.
Drain line flush
We flush the condensate drain from the unit to the discharge point before early buildup becomes a blockage.
Blower clean
We wipe and brush the fan blades to clear dust that chokes airflow and causes vibration.
Condition check
Visible signs like coil corrosion, bearing noise, or refrigerant indicators get flagged separately. Nothing's added without approval.
What You Get
Maintenance clarity, not a surprise upsell.
Routine buildup cleared
Filters, coil, drain, and blower cleaned before buildup compounds.
Visible issues flagged
If we spot a leak, drainage fault, corrosion, or noisy motor, we explain it before quoting anything.
Clear next step
If a standard clean's enough, we stop there. If not, we tell you which service path makes sense.
Aircon General Servicing FAQ
Ready to Get Started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.