Gree Aircon LP Error Code
Use this Gree LP error code guide to decide when to stop resetting, what to capture, and what to check before parts are quoted. Match the model first; same-looking codes can point to different rows.
What Does Gree LP Mean?
Gree LP is listed as models of indoor unit and outdoor unit do not match and dC bus-bar low-voltage protection in Ceiling Cassette, Ceiling Concealed Ducted, Ceiling Suspended rows such as U-Match duct type, U-Match cassette type. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Voltage, current, fuse, module, or power-supply protection has been triggered.
Loose connector, damaged harness, or outdoor electrical component fault.
PCB or inverter-module issue after power and load checks are confirmed.
What To Do Now
Use these steps before another reset or parts quote.
Stop using the unit if LP returns
Stop repeated restarts if LP returns, trips power, smells burnt, or the outdoor unit runs unusually hot.
Reset LP once
Capture the LP display, then reset once only if there is no burning smell, repeated trip, or hot outdoor unit.
Send these to us
LP error code, a clear display photo, Gree model stickers, affected rooms, reset result, and trip timing and outdoor-unit behaviour
Send Us What You're Seeing
Share LP, your Gree model, and what happened before it appeared. We'll read it and respond with the right next step before any work is approved.
What To Check Before Repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You Can Check | Technician Should Confirm |
|---|---|
| Before resetting LP, take a clear display photo. | Confirm whether LP is voltage, current, module, fuse, or protection related. |
| Capture the Gree indoor and outdoor model stickers so the correct family row is used. | Check incoming voltage, connectors, inverter module, and current draw under load. |
| Note whether one room, several rooms, or the whole system is affected, plus whether it returns after one reset. | Confirm downstream loads before replacing electrical boards or modules. |
What Changes The Next Step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What You See | What It Points To |
|---|---|
| Only one indoor unit shows LP. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same LP fault. | The shared outdoor side, power path, communication trunk, or refrigerant circuit needs priority checking. |
| The fault returns immediately after one reset. | Start with the source-row diagnostic branch before approving parts. |
| The same code appears with different meanings in the source rows. | Model family, source table, and system type decide which meaning applies before parts are quoted. |
| The model belongs to Ceiling Cassette, Ceiling Concealed Ducted, Ceiling Suspended rows such as U-Match duct type, U-Match cassette type. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
Electrical Module Or Wiring Decision
Gree LP needs voltage, current, module, and load checks before parts are quoted. The repair path depends on whether the fault is supply-side, wiring-side, or board-side.
Supply voltage and load checks separate building-side issues from unit-side faults.
Module or inverter faults need measured current and voltage evidence.
Repeated electrical trips should not be cleared repeatedly without diagnosis.
Read Next
Use these if the quote mentions the parts, checks, or repair path this code points to.
Other Gree Error Codes
If the code you're seeing isn't LP, jump to one of these or browse the full Gree list.
Ready to Get Started?
Send the LP error code, a clear display photo, and Gree model sticker. Send the model sticker so the matching official row can be checked quickly. We can help separate supply, module, load, and board checks.