LG aircon CH10 error code & blinking light
Use this LG CH10 guide to capture the fault correctly and see what should be checked before parts are quoted. Match the model first; same-looking signals can point to different rows.
What does LG CH10 mean?
LG CH10 is listed as indoor BLDC fan lock or indoor fan motor operation failure, indoor fan motor operation failure, and indoor unit: Indoor-unit BLDC fan-motor communication or rotation error in Wall-Mounted Split, VRF, Cassette rows such as HSV4 / HSV5 single-zone wall-mounted systems, LS091HSV / LS121HSV wall-mounted single-zone. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the matching source row
The same visible code has more than one source-backed meaning. Match the model family, system type, or reporting unit before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| HSV4 / HSV5 single-zone wall-mounted systems | Indoor BLDC fan lock or indoor fan motor operation failure. | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| LS091HSV / LS121HSV wall-mounted single-zone | Indoor fan motor operation failure | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| LG Multi V 5 commercial VRF | indoor unit: Indoor-unit BLDC fan-motor communication or rotation error | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
What to do now
Use these steps before customer action or a parts quote.
Stop using the unit if CH10 returns
If CH10 remains displayed or returns during operation, do not attempt an unsourced reset; get the matching source row diagnosed.
No manufacturer reset steps listed for CH10
Capture the complete CH10 pattern and model stickers first. The selected source row lists no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
CH10 error code and blinking light, a clear display photo and blinking-light video if the unit shows one, LG model stickers, affected rooms, operating state when the code appeared, and fan noise or no-airflow symptoms
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Diagnostic note | Indoor BLDC fan lock or indoor fan motor operation failure. Stop operation if airflow is weak, noisy, or stalled, then check blower obstruction, fan motor harness, motor condition, and indoor PCB output. |
| Diagnostic note | Record the exact code and LED blink pattern before booking diagnosis. For LS091HSV / LS121HSV systems, this pattern points to: Indoor fan motor operation failure |
| Diagnostic note | Record 10 and confirm that the indoor unit reported it. Avoid repeated resets and arrange fan motor, connector, feedback, driver, and mechanical-obstruction checks. |
| Singapore / model note | Official LG HVAC HSV4 / HSV5 wall-mounted self-diagnosis table. This replaces the old unattributed residential wording that incorrectly framed CH10 as a compressor discharge sensor row. |
| Singapore / model note | Use this LS091HSV / LS121HSV LED table only when the installed model or service manual matches this standard wall-mounted single-zone family. |
| Singapore / model note | LG Singapore lists Multi V 5, but the installed unit nameplate and matching service manual control. Do not apply this row to Multi V i or another LG family. |
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before taking any system action on CH10, take a clear display photo and blinking-light video if the unit shows one. | Confirm whether CH10 points to the indoor fan, outdoor fan, or drive circuit. |
| Capture the LG indoor and outdoor model stickers so the correct family row is used. | Check for blade obstruction, motor winding, feedback signal, and connector condition. |
| The selected source row lists no customer reset procedure. Note whether one room, several rooms, or the whole system is affected. | Confirm PCB fan-drive output before quoting a motor or board. |
Motor or board decision
LG CH10 is repair-first when the motor, blade, or feedback circuit is confirmed. Replacement becomes relevant only if motor or board cost is poor value for the system age.
Obstruction or loose connectors are simpler than a failed motor or board output.
Motor replacement depends on whether feedback and winding tests confirm failure.
Board replacement should follow motor and harness checks, not replace them.
LG CH10 questions
What does the LG CH10 error mean?
Can I fix a LG CH10 error myself?
Is it safe to keep running the aircon with a CH10 error?
What causes a LG CH10 error?
Will a LG CH10 error need a repair or a full replacement?
What should I send a technician about a LG CH10 error?
Diagnostic cases
How we approached similar faults on site.
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full LG list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.