Mitsubishi Electric Aircon 18 / LED1 2x, LED2 Lit
Use this Mitsubishi Electric 18 / LED1 2x, LED2 lit blinking light guide to capture the fault correctly and see what should be checked before parts are quoted.
What does Mitsubishi Electric 18 / LED1 2x, LED2 lit mean?
Mitsubishi Electric 18 / LED1 2x, LED2 lit is listed as secondary current protection in Multi-Split rows such as FP Series, Starmex R32. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Voltage, current, fuse, module, or power-supply protection has been triggered.
Loose connector, damaged harness, or outdoor electrical component fault.
PCB or inverter-module issue after power and load checks are confirmed.
What to do now
Use these steps before customer action or a parts quote.
Treat it as a fault signal
Stop repeated restarts if 18 / LED1 2x, LED2 lit returns, trips power, smells burnt, or the outdoor unit runs unusually hot.
No manufacturer reset steps listed for 18 / LED1 2x, LED2 lit
Capture the complete 18 / LED1 2x, LED2 lit pattern and model stickers first. The selected source row lists no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
18 / LED1 2x, LED2 lit blinking light, a short video of the blinking-light sequence, Mitsubishi Electric model stickers, affected rooms, operating state when the code appeared, and trip timing and outdoor-unit behaviour
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Diagnostic note | Do not keep resetting the system if this pattern returns. Record the model number, lamp or LED pattern, and affected rooms before booking diagnosis. |
| Singapore / model note | Official Mitsubishi Electric checklist action: Check indoor filters, refrigerant amount, and short-cycling airflow. |
- Source detail
- Diagnostic note
- What it says
- Do not keep resetting the system if this pattern returns. Record the model number, lamp or LED pattern, and affected rooms before booking diagnosis.
- Source detail
- Singapore / model note
- What it says
- Official Mitsubishi Electric checklist action: Check indoor filters, refrigerant amount, and short-cycling airflow.
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before taking any system action on 18 / LED1 2x, LED2 lit, take a short video of the blinking-light sequence. | Confirm whether 18 / LED1 2x, LED2 lit is voltage, current, module, fuse, or protection related. |
| Capture the Mitsubishi Electric indoor and outdoor model stickers so the correct family row is used. | Check incoming voltage, connectors, inverter module, and current draw under load. |
| The selected source row lists no customer reset procedure. Note whether one room, several rooms, or the whole system is affected. | Confirm downstream loads before replacing electrical boards or modules. |
- You can check
- Before taking any system action on 18 / LED1 2x, LED2 lit, take a short video of the blinking-light sequence.
- Technician should confirm
- Confirm whether 18 / LED1 2x, LED2 lit is voltage, current, module, fuse, or protection related.
- You can check
- Capture the Mitsubishi Electric indoor and outdoor model stickers so the correct family row is used.
- Technician should confirm
- Check incoming voltage, connectors, inverter module, and current draw under load.
- You can check
- The selected source row lists no customer reset procedure. Note whether one room, several rooms, or the whole system is affected.
- Technician should confirm
- Confirm downstream loads before replacing electrical boards or modules.
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows 18 / LED1 2x, LED2 lit. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same 18 / LED1 2x, LED2 lit fault. | Prioritise the shared outdoor side, power path, and source-listed system branch. |
| The fault remains displayed or returns during operation. | Start with the source-row diagnostic branch before approving parts. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to Multi-Split rows such as FP Series, Starmex R32. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
- What you see
- Only one indoor unit shows 18 / LED1 2x, LED2 lit.
- What it points to
- The affected room, indoor board path, wiring route, or local component should be checked first.
- What you see
- Several rooms or the outdoor unit show the same 18 / LED1 2x, LED2 lit fault.
- What it points to
- Prioritise the shared outdoor side, power path, and source-listed system branch.
- What you see
- The fault remains displayed or returns during operation.
- What it points to
- Start with the source-row diagnostic branch before approving parts.
- What you see
- The model family is different from the row you found online.
- What it points to
- Use the model or series filter first; same-looking codes can still belong to different diagnostic tables.
- What you see
- The model belongs to Multi-Split rows such as FP Series, Starmex R32.
- What it points to
- The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts.
Electrical module or wiring decision
Mitsubishi Electric 18 / LED1 2x, LED2 lit needs voltage, current, module, and load checks before parts are quoted. The repair path depends on whether the fault is supply-side, wiring-side, or board-side.
Supply voltage and load checks separate building-side issues from unit-side faults.
Module or inverter faults need measured current and voltage evidence.
Repeated electrical trips should not be cleared repeatedly without diagnosis.
Mitsubishi Electric 18 / LED1 2x, LED2 lit questions
What does the Mitsubishi Electric 18 / LED1 2x, LED2 lit error mean?
Can I fix a Mitsubishi Electric 18 / LED1 2x, LED2 lit error myself?
Is it safe to keep running the aircon with a 18 / LED1 2x, LED2 lit error?
What causes a Mitsubishi Electric 18 / LED1 2x, LED2 lit error?
Will a Mitsubishi Electric 18 / LED1 2x, LED2 lit error need a repair or a full replacement?
What should I send a technician about a Mitsubishi Electric 18 / LED1 2x, LED2 lit error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Mitsubishi Electric list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.