On this page
Remove the old aircon before renovation, or keep it?
Remove it before hacking starts if the system is being replaced, so the walls, trunking and ceilings can be redone without working around old units. Keep and protect it if it is staying, and have it serviced once the dust settles.
If a new system is going in, ask whether its package covers removing the old units. Ask too whether that holds when removal happens on an earlier trip, before the renovation.
| Job | Market range in Singapore | Our rate |
|---|---|---|
| Removal of an old aircon, per unit | $50–$200 per unit | Quoted per job |
Removal ranges vary with the number of units, access and whether disposal is included. Snowflake's installation packages take the old system away on the installation trip.
Market ranges: published rates from 3 Singapore operators. Checked 20 Nov 2026.
What can be kept for the new system
Decide this before the walls close. Piping you plan to reuse should be tested while it can still be reached.
- Concealed piping, if it holds a pressure test and matches the new unit's manual.
- The power point or isolator, if its rating suits the new outdoor unit.
- A sound stainless steel bracket, if it is rated for the new unit's weight.
- Drain routes, if the indoor units stay in the same positions.
Timing it with the renovation
Book the removal for before hacking, and the new installation after the carpentry and false ceilings are framed but before final painting. The gap between the two is when the flat has no aircon.
Before removal, the refrigerant is held in the outdoor unit or recovered, never vented.
If the aircon is staying
Cover the indoor units while sanding and hacking, and do not run them in the dust. Book a chemical service after the renovation, which clears fine dust from the coils more thoroughly than a general service.