On this page
How much does an aircon water leak repair cost?
A blocked drain line is the usual cause and the cheapest fix. In published Singapore rates it is a short job, priced per unit.
A cracked tray, a failed pump or a badly sloped drain pipe cost more. Snowflake Aircon Services' own rates are shown where it has one.
Scroll to see more columns
| Cause of the leak | Market range in Singapore | Our rate | How common |
|---|---|---|---|
| Blocked drain line, cleared and flushed | $50–$150 per unit | Quoted per job | The usual cause |
| Cracked or warped drain tray, wall-mounted unit | $120–$150 | Less common | |
| Failed condensate pump, cassette or ducted unit | Only one operator publishes a pump price; the pump model and the ceiling access set it. | Only on units with a pump | |
| Drain pipe replaced or rerouted | No published price was found for this job; the length of pipe and how it is concealed set it. | Quoted per job | When the slope or the pipe is wrong |
| Diagnostic visit to confirm the fault | $30 / visit | Quote-only work |
A drain line cleared from the indoor unit sits at the low end. A blockage deep in a concealed pipe, or a pump in a false ceiling, costs more to reach.
Market ranges: published rates from 4 Singapore operators. Checked 20 Nov 2026.
What to check before you book
Where the water appears tells a technician most of the story. Note it before anyone opens the unit.
- Dripping from the front or bottom edge of the indoor unit: usually the drain line or the tray.
- Water running down the wall below the trunking: the drain pipe joint or its slope.
- Dripping from a ceiling cassette's panel: its drain pan or drain pump.
- Started right after a servicing: a drain hose knocked loose or a tray seated wrongly.
- Ice on the pipes as well as dripping: a cooling fault, not a drain fault.
When a leak is not a drain problem
Ice on the indoor coil melts and overflows the tray when the unit stops. That points to low gas, a dirty coil or a weak fan, and clearing the drain will not stop it.
In that case the repair is the cooling fault, and the not cold repair cost guide prices each cause.
When the same leak comes back
A drain that blocks again within weeks has a cause the flush did not reach. Slime regrowing in the tray, a pipe with too little fall, or an outlet blocked outside are the usual three.
Ask what was found as well as what was cleared. A technician who names the cause can say whether a regular drain flush at servicing will keep it clear.