Skip to main content

Ceiling Cassette or Ducted Aircon for an Office or Shop

Ceiling cassettes suit an open-plan office or shop floor, because each one cools its own area and its filter comes down from the room. Concealed ducted units suit partitioned rooms and fit-outs that must show no unit.

On this page

Ceiling cassette or ducted aircon for an office?

Snowflake Aircon Services recommends cassettes when the floor is open and the panels can show, and ducted units when the space is split into rooms or the fit-out needs a clean ceiling with only grilles. The table sets out why.

Ceiling cassette or ducted aircon for an office? summary table
Ceiling cassetteConcealed ducted
Best fitOpen-plan office, shop floor, showroomPartitioned offices, clinics, a retail fit-out with a clean ceiling
What showsA panel in the ceilingGrilles or slot vents only
AirflowOut of the panel, adjustable per outlet on some modelsThrough ducts to each room's grille
Filter accessBehind the panel, from the room belowAt the unit or the return grille, through a ceiling access opening
A fault at the unitAffects the area under that cassetteAffects every room the unit feeds

Ceiling depth

Both need a ceiling void, and the published body heights are close. Daikin's SkyAir tables list round-flow cassette bodies of 256 mm and 298 mm with a 50 mm decoration panel, and its middle static pressure ducted range at 245 mm. Mitsubishi Electric describes a 250 mm thin body for its Mr Slim ceiling cassette.

The body height is not the whole depth. The duct, the drain fall and the supports take space too, so a ducted layout needs its void checked along the duct route, not only above the unit.

How the space is used

Open floors favour cassettes. Daikin lets each outlet on its round-flow cassette be set from position 0 to 4, so air can be steered away from a desk or a doorway.

Partitioned rooms favour ducted units. One concealed unit can feed several small rooms through separate grilles, where a cassette in each room means more units to buy and service.

Servicing and downtime

A cassette is serviced from a ladder in the room it cools, with the panel lowered. A ducted unit is serviced through an access opening, and the room below is covered while the work runs. Plan servicing around trading hours, and settle the access position before the ceiling is built.

SS 553:2026 is Singapore's code of practice for air-conditioning and mechanical ventilation in commercial, office and institutional buildings. Check the building's fit-out rules for where units and grilles may go.

Common questions

Is a ceiling cassette or ducted aircon better for an open-plan office?
A ceiling cassette is usually better for an open-plan office. Each cassette cools the area around it, its filter is reached from the room below, and Daikin's round-flow models let each outlet be angled separately. Ducted units suit an office split into rooms, or a fit-out that must show only grilles.
How is cassette or ducted aircon serviced in an office?
Cassette aircon in an office is serviced from a ladder in the room it cools, with the panel lowered and the filter reached from below. A ducted unit is serviced through a ceiling access opening, with the room underneath covered. Plan both around trading hours and fix the access position at fit-out.
What happens to a shop when a ducted aircon unit fails?
A shop on one ducted aircon unit loses cooling in every area that unit feeds when it fails, because all the grilles share one fan and coil. A layout of several cassettes loses only the area under the failed cassette. Ask how the zones are split before the layout is signed.
Which standard covers aircon in Singapore offices?
SS 553:2026 is the Singapore Standard code of practice for air-conditioning and mechanical ventilation in commercial, office and institutional buildings. It excludes hospitals, polyclinics, cleanrooms and laboratories. Check the building's own fit-out rules as well, because they can set where units and grilles may go.

Sources