Skip to main content

LG and Samsung Aircon Remote Symbols and Modes Explained

On both LG and Samsung aircon remotes in Singapore, a snowflake icon sets active Cool mode, a water droplet activates Dry dehumidifying mode, and fan blades run circulation only. Checking that the snowflake symbol is lit prevents warm-air confusion before calling a technician.

On this page

Core cooling and mode icons shared across LG and Samsung

Most call-outs for an aircon blowing lukewarm air trace back to an accidental button press shifting the handset from Cool into Fan or Auto. Recognising the four universal icons plus each brand's shortcut buttons solves mode mix-ups immediately.

Always point the remote directly at the indoor receiver until you hear a confirmation beep.

Core cooling and mode icons shared across LG and Samsung summary table
Symbol or buttonLG remote meaningSamsung remote meaning
Snowflake iconCool mode (primary Singapore cooling setting)Cool mode (run 20 mins before WindFree)
Water dropletDry / Dehumidification mode for sticky rainDry mode (slows fan to remove moisture)
Fan bladesFan-only circulation; outdoor compressor offFan-only circulation; zero active cooling
Brand special buttonEnergy Ctrl (caps compressor to 80%, 60% or 40%) & Jet ModeWindFree (micro-hole gentle cooling) & Fast Cooling
Internal dry iconAuto Clean (fan dries coil after shutdown)Auto Clean (runs 10 to 30 mins after power-off)

LG remote features that save power in Singapore bedrooms

LG Dual Inverter handsets feature an Energy Ctrl (Watt Option) button that caps maximum compressor draw at 80%, 60% or 40% once a bedroom cools down. Using 60% or 80% overnight with a standing fan trims electricity spikes without shutting cooling off.

Avoid leaving LG units on Jet Mode all evening; Jet forces maximum compressor speed for 30 minutes to chill a hot flat quickly.

Samsung remote shortcuts worth keeping enabled

On Samsung handsets, leave Auto Clean active so the blower runs briefly after shutdown to evaporate coil moisture and deter mould behind the WindFree fascia. Good'Sleep mode gently steps bedroom temperature upward across the night to avoid 4 am chills.

If the remote screen fades or shows garbled icons, swap both AAA alkaline batteries together before suspecting a faulty indoor receiver.

Common questions

Why does my LG or Samsung aircon keep running softly after I press off on the remote?
Continued gentle fan noise for 10 to 30 minutes after switching off an LG or Samsung aircon means Auto Clean is drying wet evaporator fins. Letting this internal dry cycle finish automatically prevents sour mould smells inside humid Singapore bedrooms.
What does the LG Energy Ctrl button with 80%, 60% and 40% icons actually do?
LG Energy Ctrl limits the outdoor inverter compressor's peak electrical input to 80%, 60% or 40% of normal maximum output. Use 80% for two people in a cool bedroom or 60% for one sleeper overnight to shave electricity usage steadily.
Why is the sun or heat symbol missing or disabled on Singapore LG and Samsung remotes?
Cooling-only air conditioners sold in Singapore omit heating hardware, so pressing a Heat or sun symbol on a multi-region replacement remote will either do nothing or stop the compressor from cooling. Always keep Singapore residential handsets on the snowflake Cool symbol.
How do I turn off the bright temperature LED display on an LG or Samsung indoor unit?
Press the Light Off button on an LG handset or hold the Options and Lighting control on a Samsung remote (or toggle Display Lighting inside the LG ThinQ or Samsung SmartThings app) to darken the indoor wall display for sleeping.

Sources