Skip to main content

Midea and PRISM+ Aircon Remote Symbols and Mode Buttons

Midea and PRISM+ aircon remotes share a familiar icon layout in Singapore: a snowflake for Cool, a water drop for Dry, blades for Fan, and circular arrows for Auto. Knowing what Follow Me, Eco and Self Clean do helps you cool evenly without wasting power.

On this page

Quick reference for Midea and PRISM+ handset symbols

Both Midea wall splits and PRISM+ Zero or Luna models pack extra comfort shortcuts onto compact LCD remotes. Misinterpreting one tiny icon often leaves a bedroom either uncomfortably warm or stuck on loud maximum fan speed.

Keep the remote on Cool at 25°C with Auto fan speed as your everyday Singapore baseline.

Quick reference for Midea and PRISM+ handset symbols summary table
Remote icon / labelWhat it triggersBest Singapore use case
Snowflake (Cool)Standard thermostatic coolingEveryday daytime and overnight bedroom comfort
Water drop (Dry)Slow-fan dehumidificationSticky rainy afternoons when room feels clammy
Eco / iEco (leaf)8-hour power-capped night cooling (typically fixed near 24 to 26°C)Overnight sleeping with steady low electrical draw
Follow Me (person / remote icon)Uses temperature sensor inside the handset instead of indoor wall coilPlace remote near bedside or desk with clear line of sight
Self Clean / Active CleanFreezes and thaws coil briefly to flush light dust into drain panRun monthly; does not replace quarterly drain servicing

How handset temperature sensing changes room cooling accuracy

Ordinarily, an indoor fan coil reads air temperature near the ceiling, where warm air pools. Activating Follow Me tells the remote to transmit temperature readings from your nightstand or study desk every few minutes so the compressor regulates around where you actually sit.

Leave the remote face-up with an unobstructed view of the wall unit whenever Follow Me is switched on, or the aircon reverts automatically to its built-in ceiling sensor.

LED button, timer and child-lock shortcuts

Pressing LED toggles the glowing white temperature digits off for pitch-dark bedrooms without affecting cooling. If buttons stop responding and a small padlock appears on the LCD screen, press the two lock-labelled keys together for three to five seconds to clear child lock.

When an indoor unit displays a two-character letter-and-number fault code (such as E1 or EC) instead of room temperature, photograph the code before switching the unit off.

Common questions

Why does my Midea or PRISM+ remote refuse to lower temperature below 24 degrees in Eco mode?
Eco and iEco modes intentionally cap compressor output and lock minimum setpoints around 24°C to save electricity during overnight runs. Press the Eco button again to exit energy-saving mode if you want full rapid cooling capacity on a hot afternoon.
Does the Self Clean button on Midea or PRISM+ units replace quarterly aircon servicing?
Built-in Self Clean cycles only frost and melt light surface dust off the evaporator fins; they cannot scrub sticky blower-wheel mould or vacuum algae jelly clogging the PVC drain pipe. Routine servicing remains necessary to stop water leaks and odours.
Why does Follow Me mode stop working when I leave my remote inside a drawer?
Follow Me relies on periodic infrared signals sent from the handset to the wall unit's receiver every few minutes. Storing the remote inside a drawer, under pillows or in another room breaks line of sight and forces the unit back to ceiling sensing.
How do I turn off the beeping sound or wall LED digits on a Midea or PRISM+ unit?
Press the LED button on the handset to switch off the bright indoor wall digits at night. On newer Midea and PRISM+ Connect WiFi models, you can also mute confirmation beeps and toggle wall display lighting directly from the mobile app.

Sources