On this page
Why is a Samsung WindFree not cold or leaking?
For poor cooling, Samsung lists a dust-blocked filter, an obstructed outdoor unit, a room larger than the unit's capacity, or pipe runs longer than allowed. For indoor leaks, it lists a unit not level and a clogged drain hole. A drain hose bent, raised or with its end in water, or rain through the wall hole, can also cause it.
The table puts each sign beside its usual fix.
| Problem | Usual cause | Fix |
|---|---|---|
| Not cold, weak airflow | Dust-blocked filter or coil | Servicing |
| Not cold, outdoor fan runs | Blocked outdoor unit, or refrigerant low | A technician clears the airflow; a leak test if gas is low |
| Not cold in one large room | Unit too small for the room | Sizing check |
| Dripping from the indoor unit | Clogged drain, a bent or raised hose, or a unit not level | A technician clears the drain and relevels the unit |
| Water at the outdoor pipe joint | Condensation on cold pipes | Usually normal; check the insulation |
What to check first
Leave the indoor unit closed. A technician checks the coil, the drain and the refrigerant.
- The filters were cleaned at the last servicing.
- Looking out from a window, the outdoor unit's airflow seems clear. Do not lean out or step onto the ledge.
- Water only drips after heavy rain, which can point to the wall hole.
- The indoor unit looks level on the wall.
When it is a repair
If cooling stays weak after a service, or the unit shows an error, the likely cause is refrigerant or a part. Samsung notes that right after cooling is stopped and restarted, the unit runs its fan only for a while to protect the compressor; selecting Cool mode again is the fix for that.
Low refrigerant points to a leak, and the leak is found and sealed before gas is added.