Ceiling Cassette Drain Pan: Causes of Ceiling Leaks
The cassette drain pan is the large insulated square tray beneath a ceiling cassette's four-sided coil that collects condensate and directs it to the built-in drain pump sump.
What the cassette drain pan does
Unlike a wall-mounted unit that drains by gravity, a ceiling cassette sits above a false ceiling and uses a moulded expanded-polystyrene or insulated ABS drain pan around all four sides of the coil. Water collects in a low sump where the float switch triggers the internal lift pump.
Mechanical component
Cassette drain pan failure signs
Match the symptom, then see what a technician checks to confirm the cause.
| What you observe | Likely causes | How we verify |
|---|---|---|
| Water drips out from the ceiling grille or leaves damp brown stains on adjacent ceiling tiles | Algae and biofilm blocking the sump inlet around the drain pump, Hairline crack in the moulded styrofoam pan letting water seep through, Saturated or delaminated pan insulation sweating on the underside | Drop the fascia panel and drain plug, pour clean water into the tray, and check whether water leaks through the pan body or overflows the rim. |
| Unit trips with an overflow error code shortly after cooling starts | Thick sludge restricting flow to the pump sump, Tilted cassette hanger rods pooling water away from the pump corner | Check cassette spirit-level alignment and flush the pan channels before replacing the pump or pan. |
| Persistent musty odour whenever the cassette starts | Standing biofilm trapped in corners of the foam drain tray, Blocked drain plug or stagnant water around a sluggish pump | Open the bottom pan inspection plug and check the tray interior for dark jelly buildup. |
- What you observe
- Water drips out from the ceiling grille or leaves damp brown stains on adjacent ceiling tiles
- Likely causes
- Algae and biofilm blocking the sump inlet around the drain pump, Hairline crack in the moulded styrofoam pan letting water seep through, Saturated or delaminated pan insulation sweating on the underside
- How we verify
- Drop the fascia panel and drain plug, pour clean water into the tray, and check whether water leaks through the pan body or overflows the rim.
- What you observe
- Unit trips with an overflow error code shortly after cooling starts
- Likely causes
- Thick sludge restricting flow to the pump sump, Tilted cassette hanger rods pooling water away from the pump corner
- How we verify
- Check cassette spirit-level alignment and flush the pan channels before replacing the pump or pan.
- What you observe
- Persistent musty odour whenever the cassette starts
- Likely causes
- Standing biofilm trapped in corners of the foam drain tray, Blocked drain plug or stagnant water around a sluggish pump
- How we verify
- Open the bottom pan inspection plug and check the tray interior for dark jelly buildup.
Replacing the cassette drain pan
Replace
Replace the cassette drain pan only when the moulded tray is cracked, warped, or permanently waterlogged so its underside sweats continuously.
You can wait
Light odour with dry ceiling tiles and a working pump can wait for scheduled cassette chemical servicing.
Do not wait
Active ceiling-board stains or dripping water above offices, shops, or lighting fixtures needs immediate shutoff and drain inspection.
If you proceed
- Typical replacement cost
- S$280–S$650
- Replacement timeline
- Same-day for pan cleaning; 3–7 working days for an OEM replacement pan
Dirty pans are lowered, flushed, and chemically cleaned during cassette servicing. Replacing a cracked OEM pan requires removing the fascia panel, draining the tray, and transferring the pump and float assembly.
Always verify the drain pump, float switch, and unit level first; over 80% of cassette ceiling leaks in Singapore are cleared by flushing the sump and overhead riser without a new pan.
Source: The drain pump continues operating after a cooling operation stops, Daikin UK, checked .
Repair service: Ceiling cassette aircon repair.
How we verify a cassette drain pan fault
These are technician checks to confirm whether the part is at fault.
Drain the pan via the rubber service plug into a bucket and note sludge volume.
Tools: Step ladder, Catch bucket, Inspection torch
Healthy reading: Clear condensate drains cleanly without thick grey jelly or standing rust.
Inspect the moulded pan body and corners for cracks, punctures, or waterlogged foam.
Healthy reading: The inner tray surface is watertight and the outer insulation face stays dry.
Verify the cassette chassis sits level across all four threaded hanger rods.
Tools: Spirit level
Healthy reading: The unit sits level so condensate channels cleanly into the pump corner.
