Daikin aircon E1 error code
Use this Daikin E1 error code guide to confirm the source table meaning, capture the reporting equipment and model, and match the service manual before diagnosis. Match the model first; same-looking codes can point to different rows.
What does Daikin E1 mean?
Daikin E1 is listed as circuit board fault, defective outdoor unit PCB, and outdoor unit main PCB abnormality in mixed model-family source rows, including VRV X RXQ-A(N)R cooling only, VRV 5-S RXYSA R32, VRV 5 Heat Recovery REMA / REYA R32, and VRV 5 Heat Pump RYMA / RXYA R32. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the matching source row
The same visible code has more than one source-backed meaning. Match the model family, system type, or reporting unit before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| EZi | Circuit board fault | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| General RA self-diagnosis guide | Defective outdoor unit PCB | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| VRV X RXQ-A(N)R cooling only | Outdoor unit main PCB abnormality | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| VRV 5-S R32 - E1 / VRV 5 Heat Recovery R32 - E1 / VRV 5 Heat Pump R32 - E1 | Outdoor PCB malfunction | Record the displayed code, unit type, and serial number for qualified diagnosis. |
What to do now
Use these steps to record evidence and match the installed model to its service manual before diagnosis or a repair quote.
Record E1 and match the service manual
Record E1 and stop there; the source table gives no customer reset procedure. Arrange diagnosis with the matching service manual.
No manufacturer reset steps listed for E1
Capture the complete E1 error code and model stickers first. The source table lists the meaning but no customer reset procedure; do not treat a generic power-cycle as manufacturer guidance.
Send these to us
E1 error code, a clear display photo, Daikin indoor and outdoor model stickers, the controller, gateway, or unit that reported the code, operating mode and affected area, and any power or setting changes made after the code appeared
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Singapore / model note | This row is taken from the selected Daikin operation manual's remote-controller fault diagnosis table. |
| Singapore / model note | Official Daikin SM-TS3 self-diagnosis row. Manual causes: Defective outdoor unit PCB; Defective inside/outside relay-wire connection. |
| Singapore / model note | Official Daikin RXQ6-48A(N)R cooling-only service-manual row. Confirm the installed model and matching regional manual before diagnosis; this source is not claimed as universal across every Daikin VRV generation. |
What to check before repair
The source table establishes the code meaning, not a repair procedure. Capture evidence first; model-specific tests belong to the matching service manual.
| You can check | Technician should confirm |
|---|---|
| Photograph the complete E1 error code before taking any action. | Confirm E1 exactly and record which controller, gateway, or unit reported it. |
| Capture the Daikin indoor and outdoor model stickers and identify which controller or unit reported it. | Match the indoor and outdoor model stickers, installed family, and reporting equipment to the source scope. |
| The source table provides no customer reset procedure. Preserve the evidence and use the matching service manual for any system action. | Follow the matching service-manual procedure and keep measured test evidence before naming a failed part. |
Source-bounded repair decision
Daikin E1 confirms the source-table fault label, not a failed part or repair procedure. Match the installed model to its service manual and require measured diagnostic evidence before approving parts, settings, or refrigerant work.
Whether the reporting controller or unit and exact installed model are confirmed.
What the matching service-manual procedure and measured tests show.
Whether the proposed repair names the evidence for the failed part or condition.
Daikin E1 questions
What does the Daikin E1 error mean?
Can I fix a Daikin E1 error myself?
Is it safe to keep running the aircon with an E1 error?
What causes a Daikin E1 error?
Will a Daikin E1 error need a repair or a full replacement?
What should I send a technician about a Daikin E1 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Daikin list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use this quote-check guide only after the matching service manual identifies the diagnostic path.