Gree aircon E4 error code
Use this Gree E4 error code guide to capture the fault correctly and see what should be checked before parts are quoted. Match the model first; same-looking codes can point to different rows.
What does Gree E4 mean?
Gree E4 is listed as compressor high discharge temperature protection, high discharge temperature protection of compressor, and high discharge-temperature protection of compressor in mixed model-family source rows, including Ultra Heat GMV6 Mini VRF (2024), MultiPRO / GMV VRF II R410A, Multi ECO R32 multi-zone, and All Match floor / ceiling R32. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the matching source row
The same visible code has more than one source-backed meaning. Match the model family, system type, or reporting unit before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| U-Match duct type | Compressor high discharge temperature protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| Multi GEN2 wall mount / Ultra Heat GMV6 Mini VRF (2024) | High discharge temperature protection of compressor | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MultiPRO / GMV VRF II R410A | High discharge-temperature protection of compressor | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| Multi ECO R32 multi-zone / All Match floor / ceiling R32 | High compressor discharge-temperature protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
What to do now
Use these steps before customer action, a sensor check, or PCB quote.
Stop using the unit if E4 returns
If the matching model-family source row applies to E4, do not reset it; record the code and arrange diagnosis. Confirm the matching source row before taking action on another model family.
Match the E4 family before taking action
Capture the E4 display and model sticker first. For the matching model-family source row, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. The same code can mean something different in another model family, so confirm the model before taking another action. Do not treat a generic power-cycle as a manufacturer reset procedure.
Send these to us
E4 error code, a clear display photo, Gree indoor and outdoor model stickers, the selected family/source row, the controller or unit that reported the code, affected rooms and observed symptoms, and result of the matching manufacturer-listed customer action, if any
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Diagnostic note | Stop operation if it returns. Check discharge temperature sensor, airflow, and refrigerant condition before compressor diagnosis. |
| Diagnostic note | Check discharge temperature sensor, outdoor airflow, expansion valve, refrigerant charge, and compressor load. |
| Diagnostic note | Record the exact code, whether it appeared on the wired controller or outdoor board, the installed GMV6 Mini model, and the operating state. Do not repeat resets or open electrical or refrigerant components; use the matching service section or arrange qualified diagnosis. |
| Singapore / model note | Official GREE U-Match service-manual row from Table 2-6-1. Use for matching duct, cassette, or floor/ceiling model families before treating it as final. |
| Singapore / model note | Official GREE Multi GEN2 service-manual row from the malfunction status sheet. Use for matching multi-zone outdoor and connected indoor style before treating it as final. |
| Singapore / model note | Official Gree Ultra Heat GMV6 Mini service-manual row created in 2024. It applies only to the named 208/230 V GMV6 Mini family when the installed model and matching manual agree; it is not claimed as every Gree GMV, GMV5, or Singapore-market code. |
What to check before repair
Choose the matching source-family row first, then use only that row's diagnostic branch and customer-action boundary.
| You can check | Technician should confirm |
|---|---|
| Before taking any action on E4, take a clear display photo. | Match E4 to one source-family decoder row before choosing a diagnostic branch. |
| Capture the Gree model sticker and identify which controller or unit reported the code. | U-Match duct type: use the matching service procedure to test only the components and conditions named by compressor high discharge temperature protection; require measured evidence before quoting parts. |
| If the matching model-family source row applies to your unit, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. Confirm the exact model family before taking a different customer action. | Multi GEN2 wall mount: use the matching service procedure to test only the components and conditions named by high discharge temperature protection of compressor; require measured evidence before quoting parts. |
| Ultra Heat GMV6 Mini VRF (2024): use the matching service procedure to test only the components and conditions named by high discharge temperature protection of compressor; require measured evidence before quoting parts. | |
| MultiPRO / GMV VRF II R410A: use the matching service procedure to test only the components and conditions named by high discharge-temperature protection of compressor; require measured evidence before quoting parts. | |
| Multi ECO R32 multi-zone: use the matching service procedure to test only the components and conditions named by high compressor discharge-temperature protection; require measured evidence before quoting parts. | |
| All Match floor / ceiling R32: use the matching service procedure to test only the components and conditions named by high compressor discharge-temperature protection; require measured evidence before quoting parts. | |
| Do not transfer a sensor, drain, valve, fan, compressor, electrical, or reset procedure from one family row to the other. |
Family-specific repair decision
U-Match duct type: diagnose compressor high discharge temperature protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for E4. Multi GEN2 wall mount: diagnose high discharge temperature protection of compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for E4. Ultra Heat GMV6 Mini VRF (2024): diagnose high discharge temperature protection of compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for E4. MultiPRO / GMV VRF II R410A: diagnose high discharge-temperature protection of compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for E4. Multi ECO R32 multi-zone: diagnose high compressor discharge-temperature protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for E4. All Match floor / ceiling R32: diagnose high compressor discharge-temperature protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for E4.
The model sticker and reporting equipment must match one decoder row before diagnosis begins.
U-Match duct type: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Multi GEN2 wall mount: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Ultra Heat GMV6 Mini VRF (2024): the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
MultiPRO / GMV VRF II R410A: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Multi ECO R32 multi-zone: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
All Match floor / ceiling R32: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Compare repair cost, system age, parts availability, and overall condition only after the family-specific fault is proven.
Gree E4 questions
What does the Gree E4 error mean?
Can I fix a Gree E4 error myself?
Is it safe to keep running the aircon with an E4 error?
What causes a Gree E4 error?
Will a Gree E4 error need a repair or a full replacement?
What should I send a technician about a Gree E4 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Gree list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.