Gree aircon P5 error code
Use this Gree P5 error code guide to capture the fault correctly and see what should be checked before parts are quoted. Match the model first; same-looking codes can point to different rows.
What does Gree P5 mean?
Gree P5 is listed as IPM or power-module protection, overcurrent protection, and compressor phase current protection in mixed model-family source rows, including Ultra Heat GMV6 Mini VRF (2024), MultiPRO / GMV VRF II R410A, Multi ECO R32 multi-zone, and All Match floor / ceiling R32. The loaded row is source-backed by official diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the matching source row
The same visible code has more than one source-backed meaning. Match the model family, system type, or reporting unit before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| GREE common mini-split support rows | IPM or power-module protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| U-Match duct type | Overcurrent protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| Multi GEN2 wall mount | Compressor phase current protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| Ultra Heat GMV6 Mini VRF (2024) | Over-current protection of inverter compressor | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| MultiPRO / GMV VRF II R410A | Overcurrent protection of inverter compressor | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| Multi ECO R32 multi-zone | Compressor over-phase-current protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
| All Match floor / ceiling R32 | Compressor phase-current overcurrent protection | Match this row to the installed model or reporting unit, then use the source-specific checks below. |
What to do now
Use these steps before customer action or a parts quote.
Stop using the unit if P5 returns
If the matching model-family source row applies to P5, do not reset it; record the code and arrange diagnosis. Confirm the matching source row before taking action on another model family.
Match the P5 family before taking action
Capture the P5 display and model sticker first. For the matching model-family source row, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. The same code can mean something different in another model family, so confirm the model before taking another action. Do not treat a generic power-cycle as a manufacturer reset procedure.
Send these to us
P5 error code, a clear display photo, Gree indoor and outdoor model stickers, the selected family/source row, the controller or unit that reported the code, affected rooms and observed symptoms, and result of the matching manufacturer-listed customer action, if any
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Diagnostic note | Switch off if the code returns. Check power supply, inverter module, compressor wiring, and outdoor board condition. |
| Diagnostic note | Check supply voltage, compressor load, and drive current before board replacement. |
| Diagnostic note | Check compressor phase current, wiring, inverter output, and compressor condition. |
| Singapore / model note | Official GREE common mini-split support row. Confirm the exact indoor and outdoor model before treating it as a model-family diagnosis. |
| Singapore / model note | Official GREE U-Match service-manual row from Table 2-6-1. Use for matching duct, cassette, or floor/ceiling model families before treating it as final. |
| Singapore / model note | Official GREE Multi GEN2 service-manual row from the malfunction status sheet. Use for matching multi-zone outdoor and connected indoor style before treating it as final. |
What to check before repair
Choose the matching source-family row first, then use only that row's diagnostic branch and customer-action boundary.
| You can check | Technician should confirm |
|---|---|
| Before taking any action on P5, take a clear display photo. | Match P5 to one source-family decoder row before choosing a diagnostic branch. |
| Capture the Gree model sticker and identify which controller or unit reported the code. | GREE common mini-split support rows: use the matching service procedure to test only the components and conditions named by IPM or power-module protection; require measured evidence before quoting parts. |
| If the matching model-family source row applies to your unit, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. Confirm the exact model family before taking a different customer action. | U-Match duct type: use the matching service procedure to test only the components and conditions named by overcurrent protection; require measured evidence before quoting parts. |
| Multi GEN2 wall mount: use the matching service procedure to test only the components and conditions named by compressor phase current protection; require measured evidence before quoting parts. | |
| Ultra Heat GMV6 Mini VRF (2024): use the matching service procedure to test only the components and conditions named by over-current protection of inverter compressor; require measured evidence before quoting parts. | |
| MultiPRO / GMV VRF II R410A: use the matching service procedure to test only the components and conditions named by overcurrent protection of inverter compressor; require measured evidence before quoting parts. | |
| Multi ECO R32 multi-zone: use the matching service procedure to test only the components and conditions named by compressor over-phase-current protection; require measured evidence before quoting parts. | |
| All Match floor / ceiling R32: use the matching service procedure to test only the components and conditions named by compressor phase-current overcurrent protection; require measured evidence before quoting parts. | |
| Do not transfer a sensor, drain, valve, fan, compressor, electrical, or reset procedure from one family row to the other. |
Family-specific repair decision
GREE common mini-split support rows: diagnose IPM or power-module protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5. U-Match duct type: diagnose overcurrent protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5. Multi GEN2 wall mount: diagnose compressor phase current protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5. Ultra Heat GMV6 Mini VRF (2024): diagnose over-current protection of inverter compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5. MultiPRO / GMV VRF II R410A: diagnose overcurrent protection of inverter compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5. Multi ECO R32 multi-zone: diagnose compressor over-phase-current protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5. All Match floor / ceiling R32: diagnose compressor phase-current overcurrent protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for P5.
The model sticker and reporting equipment must match one decoder row before diagnosis begins.
GREE common mini-split support rows: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
U-Match duct type: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Multi GEN2 wall mount: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Ultra Heat GMV6 Mini VRF (2024): the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
MultiPRO / GMV VRF II R410A: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Multi ECO R32 multi-zone: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
All Match floor / ceiling R32: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Compare repair cost, system age, parts availability, and overall condition only after the family-specific fault is proven.
Gree P5 questions
What does the Gree P5 error mean?
Can I fix a Gree P5 error myself?
Is it safe to keep running the aircon with a P5 error?
What causes a Gree P5 error?
Will a Gree P5 error need a repair or a full replacement?
What should I send a technician about a Gree P5 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Gree list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.