Gree Aircon PE Error Code
Capture the Gree PE fault correctly, then see what should be checked before parts are quoted. Match the model first; same-looking codes can point to different rows.
What does Gree PE mean?
Gree PE is listed as temperature excursion protection, phase-lacking of inverter compressor, and phase loss of inverter compressor in fault lists for more than one model family, including Ultra Heat GMV6 Mini VRF (2024) and MultiPRO / GMV VRF II R410A. This meaning comes from the manufacturer's own diagnostic material. Do not collapse this code across model families; use the model, series, or system type to choose the right row. Confirm the exact model, series, or signal row before accepting a parts quote.
Choose the listing that matches your unit
The same code has more than one listed meaning. Match the model family, the system type and the unit that shows the code before approving parts.
| Code | What it means | What to check first |
|---|---|---|
| U-Match duct type | Temperature excursion protection | Match this meaning to your installed model and the unit that shows the code, then use the checks below. |
| Ultra Heat GMV6 Mini VRF (2024) | Phase-lacking of inverter compressor | Match this meaning to your installed model and the unit that shows the code, then use the checks below. |
| MultiPRO / GMV VRF II R410A | Phase loss of inverter compressor | Match this meaning to your installed model and the unit that shows the code, then use the checks below. |
- Code
- U-Match duct type
- What it means
- Temperature excursion protection
- What to check first
- Match this meaning to your installed model and the unit that shows the code, then use the checks below.
- Code
- Ultra Heat GMV6 Mini VRF (2024)
- What it means
- Phase-lacking of inverter compressor
- What to check first
- Match this meaning to your installed model and the unit that shows the code, then use the checks below.
- Code
- MultiPRO / GMV VRF II R410A
- What it means
- Phase loss of inverter compressor
- What to check first
- Match this meaning to your installed model and the unit that shows the code, then use the checks below.
What to do now
Use these steps before customer action, gas work, a pressure check, or parts quote.
Stop using the unit if PE returns
If the manufacturer's listing for your model family applies to PE, do not reset it; record the code and arrange diagnosis. Check your own model's listing before acting on another model family.
Match the PE family before taking action
Capture the PE display and model sticker first. For the manufacturer's listing that matches your model family, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. The same code can mean something different in another model family, so confirm the model before taking another action. Do not treat a generic power-cycle as a manufacturer reset procedure.
Send these to us
PE error code, a clear display photo, Gree indoor and outdoor model stickers, the model family it matches, the controller or unit that reported the code, affected rooms and observed symptoms, and result of the matching manufacturer-listed customer action, if any
Guidance for your model
Notes that match the code to your exact model. Electrical, refrigerant, wiring, resistance and component checks are for a technician.
| Detail | What it says |
|---|---|
| Diagnostic note | Check temperature readings, airflow, and refrigerant-side condition before restarting. |
| Diagnostic note | Record the exact code, whether it appeared on the wired controller or outdoor board, the installed GMV6 Mini model, and the operating state. Do not repeat resets or open electrical or refrigerant components; use the matching service section or arrange qualified diagnosis. |
| Diagnostic note | Record the exact code, installed model, and reporting display. Use the matching Gree MultiPRO / GMV VRF II service procedure or arrange qualified diagnosis; do not keep resetting the system. |
| Singapore / model note | Official GREE U-Match service-manual row from Table 2-6-1. Use for matching duct, cassette, or floor/ceiling model families before treating it as final. |
| Singapore / model note | Official Gree Ultra Heat GMV6 Mini service-manual row created in 2024. It applies only to the named 208/230 V GMV6 Mini family when the installed model and matching manual agree; it is not claimed as every Gree GMV, GMV5, or Singapore-market code. |
| Singapore / model note | Official Gree Comfort MultiPRO / GMV VRF II service-manual row for the named North American 208/230 V R410A models. It is model-family evidence only and is not claimed as exact Singapore-market applicability. |
- Detail
- Diagnostic note
- What it says
- Check temperature readings, airflow, and refrigerant-side condition before restarting.
- Detail
- Diagnostic note
- What it says
- Record the exact code, whether it appeared on the wired controller or outdoor board, the installed GMV6 Mini model, and the operating state. Do not repeat resets or open electrical or refrigerant components; use the matching service section or arrange qualified diagnosis.
- Detail
- Diagnostic note
- What it says
- Record the exact code, installed model, and reporting display. Use the matching Gree MultiPRO / GMV VRF II service procedure or arrange qualified diagnosis; do not keep resetting the system.
- Detail
- Singapore / model note
- What it says
- Official GREE U-Match service-manual row from Table 2-6-1. Use for matching duct, cassette, or floor/ceiling model families before treating it as final.
- Detail
- Singapore / model note
- What it says
- Official Gree Ultra Heat GMV6 Mini service-manual row created in 2024. It applies only to the named 208/230 V GMV6 Mini family when the installed model and matching manual agree; it is not claimed as every Gree GMV, GMV5, or Singapore-market code.
- Detail
- Singapore / model note
- What it says
- Official Gree Comfort MultiPRO / GMV VRF II service-manual row for the named North American 208/230 V R410A models. It is model-family evidence only and is not claimed as exact Singapore-market applicability.
What to check before repair
Choose the matching source-family row first, then use only that row's diagnostic branch and customer-action boundary.
| You can check | Technician should confirm |
|---|---|
| Before taking any action on PE, take a clear display photo. | Match PE to one source-family decoder row before choosing a diagnostic branch. |
| Capture the Gree model sticker and identify which controller or unit reported the code. | U-Match duct type: use the matching service procedure to test only the components and conditions named by temperature excursion protection; require measured evidence before quoting parts. |
| If the manufacturer's listing for your model family applies to your unit, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. Confirm the exact model family before taking a different customer action. | Ultra Heat GMV6 Mini VRF (2024): use the matching service procedure to test only the components and conditions named by phase-lacking of inverter compressor; require measured evidence before quoting parts. |
| MultiPRO / GMV VRF II R410A: use the matching service procedure to test only the components and conditions named by phase loss of inverter compressor; require measured evidence before quoting parts. | |
| Do not transfer a sensor, drain, valve, fan, compressor, electrical, or reset procedure from one family row to the other. |
- You can check
- Before taking any action on PE, take a clear display photo.
- Technician should confirm
- Match PE to one source-family decoder row before choosing a diagnostic branch.
- You can check
- Capture the Gree model sticker and identify which controller or unit reported the code.
- Technician should confirm
- U-Match duct type: use the matching service procedure to test only the components and conditions named by temperature excursion protection; require measured evidence before quoting parts.
- You can check
- If the manufacturer's listing for your model family applies to your unit, record the exact display, installed model, reporting location, and operating state. Do not repeat resets; use the matching GMV6 Mini service section or arrange qualified diagnosis. Confirm the exact model family before taking a different customer action.
- Technician should confirm
- Ultra Heat GMV6 Mini VRF (2024): use the matching service procedure to test only the components and conditions named by phase-lacking of inverter compressor; require measured evidence before quoting parts.
- You can check
- Technician should confirm
- MultiPRO / GMV VRF II R410A: use the matching service procedure to test only the components and conditions named by phase loss of inverter compressor; require measured evidence before quoting parts.
- You can check
- Technician should confirm
- Do not transfer a sensor, drain, valve, fan, compressor, electrical, or reset procedure from one family row to the other.
Family-specific repair decision
U-Match duct type: diagnose temperature excursion protection on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for PE. Ultra Heat GMV6 Mini VRF (2024): diagnose phase-lacking of inverter compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for PE. MultiPRO / GMV VRF II R410A: diagnose phase loss of inverter compressor on the matching Gree system. Approve repair or replacement parts only after that branch has measured evidence for PE.
The model sticker and reporting equipment must match one decoder row before diagnosis begins.
U-Match duct type: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Ultra Heat GMV6 Mini VRF (2024): the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
MultiPRO / GMV VRF II R410A: the quote must name the test result that proves this row's fault rather than borrowing a parts list from the other family.
Compare repair cost, system age, parts availability, and overall condition only after the family-specific fault is proven.
Gree PE questions
What does the Gree PE error mean?
Can I fix a Gree PE error myself?
Is it safe to keep running the aircon with a PE error?
What causes a Gree PE error?
Will a Gree PE error need a repair or a full replacement?
What should I send a technician about a Gree PE error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Gree list or check a few codes in the same fault category.
Describe your situation
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.