Skip to main content

Mitsubishi Electric vs Mitsubishi Heavy: Which One to Buy

The two Mitsubishi brands rate alike on efficiency, so the energy label rarely decides between them. The differences that cost money come after installation, in the warranty terms.

On this page

Mitsubishi Electric or Mitsubishi Heavy Industries: which is better?

For a new system, Mitsubishi Electric has the stronger warranty, because it pays first-year labour on a compressor. On efficiency the two are level, with household splits at 4 and 5 ticks.

For an existing system, match the outdoor unit's brand. The two ranges do not pair. In its own installations, Snowflake Aircon Services defaults to Starmex for reliability, ease of servicing and how readily its parts are found.

Mitsubishi Electric or Mitsubishi Heavy Industries: which is better? summary table
Mitsubishi Electric (Starmex)Mitsubishi Heavy Industries (MHI)
Who stands behind it in SingaporeMitsubishi Electric AsiaKM Marketing Pte Ltd, the distributor
Single-split outdoor unitsMUY-GA and MUY-GP: 10 registered, 2.6 to 6.4 kWSRC: 11 registered, 2.5 to 7.1 kW
Multi-split outdoor unitsMXY-2H to MXY-5H: 7 registered, 4.5 to 9.1 kWSCM: 5 registered, 4.3 to 8.0 kW
NEA ticks, household splits4 or 54 or 5
General warranty12 months from the purchase date on the proof of purchase12 months, all parts
Compressor warranty60 months; labour and transport in the first 12 months only5 years, compressor only; labour, transport and refrigerant charging excluded
RegistrationRequired; warranty service refused without itRequired within 14 days of purchase
Who replaces a warranty compressorMitsubishi Electric onlyKM Marketing or its appointed agents only

Where the warranties actually differ

Both brands give 12 months of general cover and five years on the compressor. The gap is what the compressor cover pays for.

Mitsubishi Electric pays labour and transport on a compressor in the first year only. MHI excludes labour, transport and refrigerant charging from the start.

A compressor failure in month eight is therefore a smaller bill on a Mitsubishi Electric unit. In year three, both brands bill the labour and the gas.

Conditions that void cover

Mitsubishi Electric counts from the purchase date, not the installation date. Its terms void cover if routine servicing is missed, or the unit is rented out or used commercially.

MHI's terms exclude damage from lack of maintenance and from repairs by anyone outside its network. A change of ownership is also outside its warranty.

Keeping an existing system: match the outdoor unit

A Mitsubishi Electric indoor unit does not run on an MHI outdoor unit, or the reverse. The outdoor unit's model decides which indoor models can replace a failed one.

The prefix on the outdoor plate tells you which brand you have. Fault codes are not shared between the brands, even where a code looks the same.

  • MUY or MXY: Mitsubishi Electric. Use its fault table and parts.
  • SRC or SCM: Mitsubishi Heavy Industries. Use the MHI fault table and parts.

Where to go next

The Starmex vs Heavy Industries guide covers the name question and the combination tables. For MHI on its own, the guide asking is MHI aircon good covers its strengths and weak points.

Common questions

Are Mitsubishi Electric and Mitsubishi Heavy Industries the same company?
No. Mitsubishi Electric and Mitsubishi Heavy Industries are separate companies with separate aircon ranges, fault codes and parts. In Singapore, Mitsubishi Electric sells the Starmex range itself, while Mitsubishi Heavy Industries aircons are distributed by KM Marketing Pte Ltd. Their fault codes do not cross over.
Which has the better warranty, Mitsubishi Electric or MHI?
Both give 12 months of general cover and five years on the compressor. Mitsubishi Electric also pays labour and transport on a compressor replacement in the first year. Mitsubishi Heavy Industries' Singapore terms exclude labour, transport and refrigerant charging from the start.
Can a Mitsubishi Electric indoor unit work with an MHI outdoor unit?
No. A Mitsubishi Electric indoor unit does not pair with a Mitsubishi Heavy Industries outdoor unit, or the reverse. A replacement indoor unit has to match the existing outdoor unit's brand and appear on that brand's approved combination list for the outdoor model.
How do I tell if my aircon is Mitsubishi Electric or Mitsubishi Heavy?
Read the model plate on the outdoor unit. Mitsubishi Electric household outdoor models start with MUY or MXY. Mitsubishi Heavy Industries household outdoor models start with SRC or SCM. The prefix also tells you which brand's fault table to use.
Do I need to register a Mitsubishi Heavy Industries aircon warranty?
Yes. Mitsubishi Heavy Industries' Singapore terms require the unit to be registered with KM Marketing Pte Ltd within 14 days of purchase for the warranty to be effective. Keep the confirmation with the purchase invoice and the installation record for any claim.

Sources