On this page
Quick summary
SRK suits a flat kept seven to ten years by a household that can wait for a sourced part. It is a poorer fit past year ten or where days without cooling are unacceptable. Mitsubishi Heavy is a different company from Mitsubishi Electric.
Is Mitsubishi Heavy the right call for your home?
For a smaller install kept under a decade, SRK is honest mid-range value. The case weakens past year ten, when board and compressor parts need sourcing. Owners who need quick turnaround or a longer horizon are better served by a brand with a deeper local parts pipeline.
| Right fit | Wrong fit |
|---|---|
| Horizon of 7 to 10 years, then renovate or move | 15-year horizon where parts depth dominates |
| Comfortable waiting for a sourced part | Cannot tolerate days without cooling |
| Installer services MHI regularly and knows SRK | Installer works mostly on Daikin or Starmex |
| System 2 or 3 in a flat | Large multi-split where one board affects several rooms |
| Knows MHI is separate from Mitsubishi Electric | Expects Starmex support under an MHI badge |
Which Mitsubishi Heavy models are registered in Singapore right now?
Rows come from the NEA aircon register retrieved 22 July 2026, which held 21 MHI records. Registration expires on the NEA date, so confirm the current entry before ordering.
Scroll to see more columns
| NEA model | Type | Cooling (kW) | NEA ticks | Registration expires |
|---|---|---|---|---|
| SCM80YS-W | Multi split | 8.03 | 5 | 21 Feb 2028 |
| SCM40YS-W, DXM40YS-W | Multi split | 7.81 | 5 | 15 Aug 2027 |
| SCM30YS-W, DXM30YS-W | Multi split | 5.95 | 5 | 13 Aug 2027 |
| SCM60YS-W | Multi split | 5.88 | 5 | 21 Feb 2028 |
| SCM25YS-W, DXM25YS-W | Multi split | 4.32 | 5 | 25 Dec 2028 |
| FDC125YNA-W8 | Single split | 10.94 | 4 | 9 Mar 2028 |
| SRC24YYS2-W8 | Single split | 7.14 | 4 | 23 Dec 2028 |
| SRC13YYS3-W8 | Single split | 3.49 | 5 | 18 May 2029 |
| SRC10YVS-W7 | Single split | 2.51 | 5 | 2 Feb 2029 |
Two notes competitors usually miss
All five registered multi-splits are 5-tick. Single splits mix 4 and 5, so efficiency depends on the capacity class.
Some entries pair an outdoor and an indoor model. Match the full entry to the quote.
How does a Mitsubishi Heavy system behave over ten years?
MHI follows a shorter curve than Starmex, and most of the difference arrives late. The early years are quiet. After year eight the parts pipeline is what changes.
| Year band | What owners notice | Typical service event |
|---|---|---|
| Year 1-3 | Runs reliably and the build holds up | Filter cleaning, general service, drainage checks |
| Year 4-7 | Signal and drainage faults appear at normal rates | Sensor checks, chemical service, drain flush |
| Year 8-10 | Board faults rise and parts sourcing adds delay | Board replace decision; compressor failure tips to replacement |
When it faults, start with the code
An SRK code can point at the signal path rather than the component in front of you. Note the exact code, or film both lamps, with what the unit was doing. The Mitsubishi Heavy Industries error codes hub carries residential SRK blinking-light rows and the commercial display families.
Which Mitsubishi Heavy configuration fits your home?
Count the rooms occupied together on a normal evening. Two bedrooms point at the SCM25YS-W or SCM30YS-W class; three or four rooms sit in the SCM40YS-W to SCM80YS-W range. Single splits cover one-room top-ups. The site check confirms the simultaneous load and final size.
What should you ask before signing an installation quote?
The bca trained installer guide covers who may mount an outdoor unit on an HDB ledge. Two MHI conditions stay here.
| Question for the installer | What a good answer sounds like |
|---|---|
| Will the invoice state the warranty commencement date, and will you register the unit? | Yes: commencement date on the invoice, registration done after installation. |
| How is the system vacuumed and leak-tested before charging? | Vacuum held to the manufacturer's spec, then a standing pressure test before refrigerant is released. |
Cross-shopping Mitsubishi Electric or Panasonic?
Mitsubishi Heavy and Mitsubishi Electric share nothing. The Mitsubishi Electric vs Mitsubishi Heavy comparison sets out where Starmex carries wider service support and faster parts. Panasonic competes on similar terms with a stronger local network. Installer experience with the specific brand usually decides.
Common questions
Is Mitsubishi Heavy the same as Mitsubishi Electric?
What sizes does the SRK range cover in Singapore?
How long does a Mitsubishi Heavy aircon last?
Does Mitsubishi Heavy have 5-tick models?
Sources
Sources checked .