Daikin aircon P0 error code
Use this Daikin P0 error code guide to decide when to stop resetting, what to capture, and what to check before parts are quoted.
What does Daikin P0 mean?
Daikin P0 is listed as shortage of refrigerant amount in thermal storage unit in Residential VRV, VRV rows such as VRV. The loaded row is source-backed by official diagnostic material. Confirm the exact model, series, or signal row before accepting a parts quote.
Low refrigerant, active leak, restriction, or abnormal pressure reading.
Dirty condenser, weak outdoor fan, blocked airflow, or high-load operation.
Pressure sensor, expansion path, or compressor protection after readings are taken.
What to do now
Use these steps before another reset, gas work, pressure check, or parts quote.
Stop using the unit if P0 returns
Stop using the unit if P0 returns with weak cooling, frost, hissing, or outdoor-unit tripping.
Reset P0 once
Capture the P0 display, then power-cycle once only if the unit is not icing, leaking, or tripping. Do not use reset as a gas or pressure fix.
Send these to us
P0 error code, a clear display photo, Daikin model stickers, affected rooms, reset result, and cooling-loss timeline and any recent gas top-up
Source-specific guidance
These diagnostic-reference notes help match the code to the exact model. Electrical, refrigerant, wiring, resistance, and component checks are technician work, not DIY steps.
| Source detail | What it says |
|---|---|
| Source repair action | Stop the system if it smells burnt, leaks, or trips power; note the exact model and code before booking diagnosis. |
| Singapore / model note | Official Daikin SM-TS3 self-diagnosis row. Manual causes: Shortage of refrigerant; Clogged refrigerant piping. |
What to check before repair
Use this split to separate safe evidence capture from the tests a technician should prove before quoting parts.
| You can check | Technician should confirm |
|---|---|
| Before resetting P0, take a clear display photo. | Match P0 to low-pressure, high-pressure, leak, or refrigerant-cycle protection. |
| Capture the Daikin indoor and outdoor model stickers so the correct family row is used. | Measure operating pressures, coil temperatures, airflow, and outdoor fan condition. |
| Note whether one room, several rooms, or the whole system is affected, plus whether it returns after one reset. | Leak-check or pressure-test before recommending another refrigerant top-up. |
What changes the next step
These clues decide whether the first check is room-side, shared outdoor-side, refrigerant-side, source-table, or model-family confirmation.
| What you see | What it points to |
|---|---|
| Only one indoor unit shows P0. | The affected room, indoor board path, wiring route, or local component should be checked first. |
| Several rooms or the outdoor unit show the same P0 fault. | The shared outdoor side, power path, communication trunk, or refrigerant circuit needs priority checking. |
| Cooling is weak, frost appears, or the outdoor unit trips under load. | Pressure, airflow, leak, and condenser checks should come before another top-up. |
| The model family is different from the row you found online. | Use the model or series filter first; same-looking codes can still belong to different diagnostic tables. |
| The model belongs to Residential VRV, VRV rows such as VRV. | The loaded row is source-backed by official diagnostic material. Use the matching source row before quoting parts. |
Pressure, leak, or airflow decision
Daikin P0 needs measured pressure, airflow, and leak evidence before gas work is approved. Replacement only becomes serious when the leak, compressor, or coil repair is uneconomical.
A top-up alone is poor value if the leak source is not found.
High-pressure faults often come from airflow, condenser, fan, or overcharge conditions.
Coil leaks or compressor-related findings can shift older systems toward replacement.
Daikin P0 questions
What does the Daikin P0 error mean?
Can I fix a Daikin P0 error myself?
Is it safe to keep running the aircon with a P0 error?
What causes a Daikin P0 error?
Will a Daikin P0 error need a repair or a full replacement?
What should I send a technician about a Daikin P0 error?
Confirm the fault
Share the error code, model number and symptoms so we can assess the likely cause.
Not the right code?
Browse the full Daikin list or check a few codes in the same fault category.
Ready to get started?
Tell us what’s going on. Symptoms, setup, photos, anything we should know. We’ll assess and come back with the right next step.
Read next
Use these if the quote mentions the parts, checks, or repair path this code points to.